1980 gmc heater control cable location

[1972BackInBlackC10]

i recently had my heater control and radio out of my truck after i reinstalled the my upper arm on my heater control wouldnt move, so of course like an idiot i tried to force it and it broke

i found the cable that wasnt moving thinking it was seized and needed replacing i removed it, after removing it i find that it isnt seized up i check the other two cables to make sure i didnt remove the wrong one and the both move freely

im thinking i either had the cable in the wrong locations and it wouldnt move or it was kinked some how possibly even a combination of both, i looked on here and couldnt find anything on this for a non ac truck, maybe i didnt look hard enough? can anyone tell me what cable goes where on my heater box or provide me with a link to someone who has done this

[Pop's C-10]

here's a write up that may help

http://67-72chevytrucks.com/vboard/s...d.php?t=463885

[1972BackInBlackC10]

thanks but that was the one i was referring to its newer and an a/c truck also doesnt explain or show where on the controls the cables go, i need to know what cables go to what loction on the controls on a non ac truck

[motornut]

i'll see if i can grab one after from the 79 jimmy non AC right?
cables at the controls or air box

[1972BackInBlackC10]

yes non ac, i need to know what cable to what location on the box, basically i want to make sure the cables on the controls are in the right spot on the box

[motornut]

well i didn't get an all in shot cause it's tight with the door in...but