please post pics of seats!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

440 charger · 05-29-2003, 05:40 PM

i wanna see what some differant seats look like in these trucks!!!
all that ive seen is a 60/40(and that was for a quick sec.) please help me out and show me what some differant years seats look like!! I wanna put a new seat in my truck as soon as possible but dont want to make the wrong decision!!!

68_GMC_910 · 05-29-2003, 05:55 PM

VELOUR!!!! lol, the ladies love the velour.

Dropt72Shortbed · 05-29-2003, 05:57 PM

Quote:

Originally posted by 68_GMC_910
VELOUR!!!! lol, the ladies love the velour.

lol.... but im not sure what they think about the guy inside....?

dubie · 05-29-2003, 05:59 PM

I wore that same yellow and black shirt in 1987 !!! LOL
Nice seat BTW

jays68yak · 05-29-2003, 06:15 PM

95-98 chevy bucket seats in a 69 suburban

JHickson6 · 05-29-2003, 07:21 PM

Love the shades 68_GMC_910, have you checked out the www.pegcitycruzin.ca site yet, most of us peggers are on there!

MandarinSixSeven · 05-29-2003, 07:25 PM

98 Grand Cherokee buckets...bad pic though

**Palf70Step** · 05-29-2003, 07:44 PM

94 C1500 Extended cab split bench going in. That's why it be crooked looking.

**BOSS** · 05-29-2003, 08:25 PM

Why not just cover the bench?Purple anyone?

chucks70 · 05-29-2003, 08:34 PM

Jays68, does the passenger side bucket tilt forward on those? I think they look great! Reason I asked is I want to replace the buckets in my Blazer.

spinning wheels · 05-29-2003, 08:35 PM

MandarinSixSeven, how did you mount your Jeep seats? I'm installing some '95 grand cherokee seats in my truck, but don't want to cut them up until I'm confident with the mounting setup.

Brewski* · 05-29-2003, 08:46 PM

How 'bout STOCK Buckets

Wootdog · 05-29-2003, 08:59 PM

Must be thinking on the same wave length as I am this evening. I need to figure out what will look good in the 67 project soon. My brother told me that he when he had the truck that Fiero seats would do it right. Not too big and just right. They actually have speakers in the head rests. What do you all think? Wootdog.

jays68yak · 05-29-2003, 09:21 PM

chucks70 Yes the passanger side tilts forward. If you are going to be putting a set like mine in a blazer make sure to get a set out of a two door blazer or ext cab truck. Those ones should automaticly slide forward when you tilt it forward to get in.

Eddie H. · 05-29-2003, 09:53 PM

How about stock houndstooth seat cover.

*Randy70C-10* · 05-29-2003, 10:06 PM

I went with the original seat and had a friend make me a cover for it.

68CST327 · 05-29-2003, 10:19 PM

CST buckets seats:

NSANE68!!! · 05-30-2003, 12:19 AM

Here's my 60/40 split bench out of a 89-90, before the government mandated those ugly ass headrests in pickups. Covered it old school PIMP style. Black tweed and LEAPORD print. SWEEEEEEEEEET!!!!

Chip327 · 05-30-2003, 03:30 AM

Im with Stock. Look good and are very comfortable

Chip327 · 05-30-2003, 03:37 AM

Try again

Andy4639 · 05-30-2003, 07:40 AM

This is mine. It has shoulder harness and 3rd. person seat belts also. Works very well in these trucks. I didn't even cut the seat down any.

OHsweet69 · 05-31-2003, 08:20 AM

here are some astro van seats on there stock mounts. they sit a little high but comfortable.

lngbed71 · 05-31-2003, 10:42 AM

Original bench, re-covered with the rear seat fold-down console and drink holder from a Caddy grafted in the center. Easy to do.

case_bt · 05-31-2003, 03:57 PM

heres mine

jewels. · 05-31-2003, 05:03 PM

i had a custom cover added to my original bench --- its a sparkling black velour --- with a custom inscripted words 'Chevy' in the center of the seat

i had the same fabric used to cover the dashpad and the sunvisors --- and found a really nice matching carpet too.

here is a pic:

http://expert.ics.purdue.edu/~leonar...0Interior.html

jewels.

05-29-2003, 05:40 PM	#1
440 charger Registered User Join Date: Mar 2003 Location: oakdale,ca Posts: 234	please post pics of seats!!!! i wanna see what some differant seats look like in these trucks!!! all that ive seen is a 60/40(and that was for a quick sec.) please help me out and show me what some differant years seats look like!! I wanna put a new seat in my truck as soon as possible but dont want to make the wrong decision!!!

05-29-2003, 05:55 PM	#2
68_GMC_910 what would Neal do? Join Date: Sep 2002 Location: Winnipeg, Manitoba, Canada Posts: 150	VELOUR!!!! lol, the ladies love the velour. Attached Images __________________ 1968 GMC 910 Long Step 250/3onTree 1969 Chevy C10 longfleet, 350/350

05-29-2003, 05:59 PM	#4
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	I wore that same yellow and black shirt in 1987 !!! LOL Nice seat BTW __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

05-29-2003, 06:15 PM	#5
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,453	95-98 chevy bucket seats in a 69 suburban Attached Images __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

05-29-2003, 07:21 PM	#6
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Love the shades 68_GMC_910, have you checked out the www.pegcitycruzin.ca site yet, most of us peggers are on there! __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

05-29-2003, 07:25 PM	#7
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	98 Grand Cherokee buckets...bad pic though Attached Images __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

05-29-2003, 07:44 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	94 C1500 Extended cab split bench going in. That's why it be crooked looking. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 05-29-2003 at 08:52 PM.

05-29-2003, 08:25 PM	#9
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	. Why not just cover the bench?Purple anyone? Attached Images __________________ Support our site Norwood Survivor

05-29-2003, 08:34 PM	#10
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	Jays68, does the passenger side bucket tilt forward on those? I think they look great! Reason I asked is I want to replace the buckets in my Blazer. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

05-29-2003, 08:35 PM	#11
spinning wheels Registered User Join Date: Sep 2001 Location: Hacienda Heights, California USA Posts: 474	MandarinSixSeven, how did you mount your Jeep seats? I'm installing some '95 grand cherokee seats in my truck, but don't want to cut them up until I'm confident with the mounting setup. __________________ '72 GMC custom camper 350/350

05-29-2003, 08:46 PM	#12
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	How 'bout STOCK Buckets How 'bout STOCK Buckets Attached Images Last edited by Brewski; 05-30-2003 at 08:54 AM.*

05-29-2003, 08:59 PM	#13
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	You Guys and Gals Must be thinking on the same wave length as I am this evening. I need to figure out what will look good in the 67 project soon. My brother told me that he when he had the truck that Fiero seats would do it right. Not too big and just right. They actually have speakers in the head rests. What do you all think? Wootdog. __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

05-29-2003, 09:21 PM	#14
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,453	chucks70 Yes the passanger side tilts forward. If you are going to be putting a set like mine in a blazer make sure to get a set out of a two door blazer or ext cab truck. Those ones should automaticly slide forward when you tilt it forward to get in. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

05-29-2003, 09:53 PM	#15
Eddie H. Registered User Join Date: Mar 2001 Location: Paradise TX USA Posts: 1,200	How about stock houndstooth seat cover. Attached Images __________________ "Negative people always seem to have a problem for every solution"

05-29-2003, 10:06 PM	#16
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I went with the original seat and had a friend make me a cover for it.



Register or Log In To remove these advertisements.

05-29-2003, 10:19 PM	#17
68CST327 Registered User Join Date: Aug 2002 Location: USA Posts: 443	CST buckets seats:

05-30-2003, 12:19 AM	#18
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	Here's my 60/40 split bench out of a 89-90, before the government mandated those ugly ass headrests in pickups. Covered it old school PIMP style. Black tweed and LEAPORD print. SWEEEEEEEEEET!!!! Attached Images __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

05-30-2003, 03:30 AM	#19
Chip327 Registered User Join Date: Feb 2003 Location: Kamloops, BC, Canada Posts: 45	Im with Stock. Look good and are very comfortable Attached Images __________________ CHIP327 67 GMC Pickup

05-30-2003, 03:37 AM	#20
Chip327 Registered User Join Date: Feb 2003 Location: Kamloops, BC, Canada Posts: 45	Try again Attached Images __________________ CHIP327 67 GMC Pickup

05-30-2003, 07:40 AM	#21
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	60-40 SEAT 1988 This is mine. It has shoulder harness and 3rd. person seat belts also. Works very well in these trucks. I didn't even cut the seat down any. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

05-31-2003, 08:20 AM	#22
OHsweet69 Registered User Join Date: Jan 2002 Location: crothersville, IN 47229 Posts: 18	here are some astro van seats on there stock mounts. they sit a little high but comfortable. Attached Images __________________ 69 short step (on 2000 durrango frame) 95 dodge cummins cummins 92 dodge dually 4x4 cummins 77 ford hi-boy (cummins someday)

05-31-2003, 10:42 AM	#23
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	Original bench, re-covered with the rear seat fold-down console and drink holder from a Caddy grafted in the center. Easy to do. Attached Images __________________ Land of the free Because of the brave

05-31-2003, 03:57 PM	#24
case_bt Registered User Join Date: Jan 2002 Location: willis tx Posts: 374	heres mine Attached Images

05-31-2003, 05:03 PM	#25
jewels. Registered User Join Date: Jul 2001 Location: Munster, IN Posts: 1,100	sparkling velour! i had a custom cover added to my original bench --- its a sparkling black velour --- with a custom inscripted words 'Chevy' in the center of the seat i had the same fabric used to cover the dashpad and the sunvisors --- and found a really nice matching carpet too. here is a pic: http://expert.ics.purdue.edu/~leonar...0Interior.html jewels. __________________ 68 C10 Red Step 350 my first child & main focus 58 3200 Apache LWB Step the upcoming project Last edited by jewels.; 03-11-2004 at 03:48 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.