|
11-01-2012, 01:16 AM | #1 |
Registered User
Join Date: Mar 2009
Location: NW, Colorado
Posts: 285
|
Electric Fuel Pump
I am just getting my motor ready to fire. I am running a 350 bored, cam, headers, intake etc. I am wondering what ratings I should get for an electric fuel pump? I am running a Holley street avenger 650. I am set to run 14 psi but not sure what flow rate I need?
What would you run?
__________________
Confidence is the feeling we have before we fully comprehend the situation |
11-01-2012, 01:42 AM | #2 |
Registered User
Join Date: Jul 2012
Location: Marysville, WA
Posts: 298
|
Re: Electric Fuel Pump
I don't claim to be an expert, but that sounds like too much pressure to me. You might want to double check your numbers before deciding on a pump. I would normally think around 7 PSI.
Adam |
11-01-2012, 07:07 AM | #3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Electric Fuel Pump
i'd run a good old reliable mechanical fuel pump as that setup there is no need or advantage in running an electric prone to problem and failure fuel pump
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
11-01-2012, 07:33 AM | #4 |
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Electric Fuel Pump
I agree with cdowns, above. That's way too much fuel pressure for a street Holley. Most Holleys will live well with 5-7 psi. A good mechanical pump will serve well for that. Plus, in my experience, most electric pump are just flat-out NOISY. But, It's your truck and the choice is up to you.
. I ran this pump on a 468 cu BBC and a 750 Holley and had zero problems: http://www.summitracing.com/parts/hl...7-11/overview/ . Carter makes an electric pump that will deliver about 6 psi. . http://www.summitracing.com/parts/crt-p4070/overview/ Last edited by TobyArnot; 11-01-2012 at 07:38 AM. |
11-01-2012, 07:49 AM | #5 | |
Account Suspended
Join Date: Oct 2012
Location: phx, az
Posts: 868
|
Re: Electric Fuel Pump
Quote:
honestly get a stock fuel pump, mount it on your motor and enjoy. for example, i had stock pump on my 750cfm, performer rpm intake, comp 280 cammed, headers, dart headed 350 motor, never had any problems. hope this helps.. |
|
11-01-2012, 07:52 AM | #6 |
Registered User
Join Date: Aug 2012
Location: Junction City, KS
Posts: 782
|
Re: Electric Fuel Pump
5-7 psi is what you should be running. I suggest just using a mechanical pump, unless your engine is like mine and has no place for a mechanical. Edelbrock and Holley both sell performance electric fuel pumps, costly but good quality. I personally just purchased a off the shelf one at AutoZone, and haven't had any issue with it so far. Runs 5-7psi, fuel filter that mounts to it, and is internally regulates the pressure.
__________________
Joseph Joe's 69 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543253 1969 GMC SWB-350 SBC 700R4 2013 Ram 2500 CC Laramie Longhorn Edition-6.7 PPEI EFI Live CSP5 5” ProFlo Exhaust |
11-01-2012, 10:13 AM | #7 |
Registered User
Join Date: Oct 2012
Location: ontario canada
Posts: 43
|
Re: Electric Fuel Pump
5-7 psi. If you really have to run an electric, look at Carter pumps. They have some self regulating ones which will work very well for you. I had one on my Camaro for about 20 years! Not one single problem with it!!! ALWAYS run fuel filters before, and after electrics. A filter before keeps any trash from your tank from being circulated through the pump, and ruining it.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|