![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Question on value of a truck
I found an 84 Chevy long bed 2wd that’s in good condition. 60,000 miles (if that) and very little surface rust on the right rear fender. Passenger door seals are tight, and the interior on that side looks new. Down side is the truck was side swiped on the driver side, damaging the door, cab corner and bed in front of the fender. Frame is straight. The engine bay is clean with the typical dust and dirt accumulation of a 30 year old truck. 350 with auto. There’s a cargo shell that’s been on the truck since new, so the bed has no rust at all. The owner was using the truck last to store drywall for his garage over last winter.
So, what’s a truck like this worth? What would YOU pay for a rot-free, very clean, mid-80’s running truck? My CFO is balking at buying this as I already have my 50 project truck and she says I don't *need* another vehicle (2 cars, 3 motorcycles and the aforementioned 50). I'm thinking it would be a good vehicle to turn. I can get pictures this weekend.
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2009
Location: Prescott, Arizona
Posts: 2,396
|
Re: Question on value of a truck
Millions of these things made so it's not rare by any means. To top that off it's wrecked. Sounds like a typical used up truck.
In my opinion I wouldn't give more than a few hundred for something like that, and I would have to REALLY want it ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2009
Location: Prescott, Arizona
Posts: 2,396
|
Re: Question on value of a truck
http://portland.craigslist.org/mlt/cto/3434466649.html
Here's an example. Clean truck, but no options, pretty much a plain jane 4x4. Out here they are a dime a dozen. Could take this back East in the rust belt and make a couple thou maybe. Tough in this economy though. When I lived in Ohio I came out here to Battle Ground, Washington to buy my current 79 1 ton 454 pickup, loaded with options. Drove it back to Ohio 2600 miles. Original paint, rust free. It's 3 times the truck of this one listed and I paid nearly the same price with 70k original miles. Plenty of cheap ones out here, solid and straight. Just have to look and be willing to do a little traveling. |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Oct 2012
Location: phx, az
Posts: 868
|
Re: Question on value of a truck
1200 bucks maybe
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2012
Location: Little Rock, Arkansas
Posts: 770
|
Re: Question on value of a truck
Id offer 500-800.
Posted via Mobile Device
__________________
1979 ![]() 1996 Silverado x-cab "the daily" |
![]() |
![]() |
![]() |
#6 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Question on value of a truck
a big ?
are you buying for a build or parts make sure of the staus of it....like not written off that kind of a hit can twist the body,not just the frame I know ![]()
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Re: Question on value of a truck
If I buy it, it will be to use and eventually rod. It drives nice and doesn't appear to dogleg. No weird shimmy or shakes. Body doesn't scarce me as it wasn't a big enough hit to keep the door from opening.
I'll get pictures this weekend. Posted via Mobile Device
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Re: Question on value of a truck
Here's the photos of the truck in question. I forgot I had these from an earlier e-mail. Typical old truck. Could use some bondo and a re-paint.
As you can see, the sideswipe damage is not bad. Basically remove or replace the running boards and it wouldn't be as noticeable.
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
![]() |
![]() |
![]() |
#9 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Question on value of a truck
thats not bad at all,compared to mine ,lol thats a shopping cart dent,or hitting a snowy ditch
hope you get him to drop the $$ tho with uncut grass and dirt under it watch for tires cracking,and rot from sitting(bottom)
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|