anybody ever bought from Chevy Duty? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

19mike69 · 06-05-2003, 04:44 PM

was comparing prices on a few things i need to buy and chevy duty was a little bit cheaper....do they sell good products?....are they a pain to order from?

Slammed67 · 06-05-2003, 04:52 PM

I've had pretty good luck with them, but I usually go to their place and pick up my parts since they are in town. However, I've had excellent service from GMC Paul's and would prefer to buy from him or one of the other smaller vendors.

JimKshortstep4x4 · 06-05-2003, 04:54 PM

I have been getting parts from Chevy Duty for a long time and have never had any real problems. They are easy to order from and they are listed on the vendor list for this board. They are not the only ones that I buy from but they are one of many good vendors.

Jim

**1971Stepside** · 06-05-2003, 04:55 PM

On every experience I have had they didn't have all the parts I needed. However, they had great quality on the ones they did have. I also went to the store to pick up the parts.

gman · 06-05-2003, 05:02 PM

I bought something from CD that came dented. The dent was under a sticker. Trying to get resolution was more hassle than it was worth, considering the low $ value and I just took it in the shorts on that. The stress of dealing with it isn't worth it in my opinion. But my future orders will be from one of the other vendors on this board all the time. Just my experience.........

**Palf70Step** · 06-05-2003, 05:52 PM

I'm pretty much like the others. I have order from Chevy Duty and haven't had any problems. they are quick and easy and so far very quick to get things out. I don't normally use them, but they have been good when I needed them.

jwhitfield · 06-05-2003, 06:27 PM

My experience hasn't been too bad, I did order some molded door panels that I thought were pretty low quality. They were real flimzy and the stainless trim didn't seem to fit as I recall.....

*Gee_Emm* · 06-05-2003, 06:39 PM

I been to their place and order from them a couple times and have gotten good stuff

Power Trip · 06-05-2003, 09:18 PM

Everytime I order I get what I want and quickly. The quality is good also. Jim

06-05-2003, 04:44 PM	#1
19mike69 Registered User Join Date: Jul 2002 Location: pottsboro,tx Posts: 513	anybody ever bought from Chevy Duty? was comparing prices on a few things i need to buy and chevy duty was a little bit cheaper....do they sell good products?....are they a pain to order from?

06-05-2003, 04:52 PM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	I've had pretty good luck with them, but I usually go to their place and pick up my parts since they are in town. However, I've had excellent service from GMC Paul's and would prefer to buy from him or one of the other smaller vendors. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra Last edited by Slammed67; 06-05-2003 at 04:59 PM.

06-05-2003, 04:55 PM	#4
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	On every experience I have had they didn't have all the parts I needed. However, they had great quality on the ones they did have. I also went to the store to pick up the parts. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

06-05-2003, 05:02 PM	#5
gman Registered User Join Date: Nov 2000 Location: Ogden, Utah Posts: 290	I bought something from CD that came dented. The dent was under a sticker. Trying to get resolution was more hassle than it was worth, considering the low $ value and I just took it in the shorts on that. The stress of dealing with it isn't worth it in my opinion. But my future orders will be from one of the other vendors on this board all the time. Just my experience......... __________________ 72 Chevy SWB Custom Deluxe K10, 350/SM465, PS, PB, Fact. Air 2000 Harley...Wide Glide

06-05-2003, 05:52 PM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	I'm pretty much like the others. I have order from Chevy Duty and haven't had any problems. they are quick and easy and so far very quick to get things out. I don't normally use them, but they have been good when I needed them. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-05-2003, 04:54 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I have been getting parts from Chevy Duty for a long time and have never had any real problems. They are easy to order from and they are listed on the vendor list for this board. They are not the only ones that I buy from but they are one of many good vendors. Jim

06-05-2003, 06:27 PM	#7
jwhitfield Registered User Join Date: Apr 2003 Location: Temecula, CA Posts: 56	My experience hasn't been too bad, I did order some molded door panels that I thought were pretty low quality. They were real flimzy and the stainless trim didn't seem to fit as I recall.....

06-05-2003, 06:39 PM	#8
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I been to their place and order from them a couple times and have gotten good stuff

06-05-2003, 09:18 PM	#9
Power Trip Got Caddy? Join Date: Jul 2002 Location: DeSoto,MO. Posts: 115	Everytime I order I get what I want and quickly. The quality is good also. Jim __________________ 1969 c-10 swb fleetside with dreams of a caddy 500 Bagged shaved and rollin' on 18's Future bumper sticker. Looks like a chevy, runs like a caddy!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.