![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Oct 2012
Location: Rio Rancho, New Mexico
Posts: 44
|
striaght 6 and 4 on floor to 350 and 350 turbo
i was wondering if i have to switch the transmission crossmembers or if i can use the 1 in there now with the 350 trans?
![]() |
![]() |
![]() |
![]() |
#2 |
Junior Member
![]() Join Date: Sep 2005
Location: Fresno,California
Posts: 224
|
Re: striaght 6 and 4 on floor to 350 and 350 turbo
Your 4 speed doesn't have a cross member, it is supported at the bell housing. So a different cross member is needed.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2012
Location: Rio Rancho, New Mexico
Posts: 44
|
Re: striaght 6 and 4 on floor to 350 and 350 turbo
so to take out whats in there nnow i would have to use my air hammer and chissel it off or what?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2010
Location: Auburn NY
Posts: 1,470
|
Re: striaght 6 and 4 on floor to 350 and 350 turbo
you can grind the top of the rivits flush(close) to the frame then air hammer them out.or some grind an x pattern in the top the air hammer off.
nice av pic!! ![]()
__________________
My build thread!! http://67-72chevytrucks.com/vboard/s...d.php?t=474018 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|