LA 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 01-27-2013, 10:23 PM

6.0 LQ4, complete with all accessories and wiring harness, ECM, and sensors (not pictured). Ran before pulled, though I had planned on a rebuild.

SOLD I am willing to crate and ship or hold for pickup for a short time.

I need this gone, it's sitting on my only engine stand!

gringoloco · 01-27-2013, 10:29 PM

799 cylinder heads, these are the same casting as the highly desirable 243/LS6 heads, but without the sodium filled valves. This is the best cathedral port head GM produced. Removed from an 18,000 mile engine. These are bolt-on and go heads. Fully assembled with rocker arms and covers.

SOLD

gringoloco · 01-27-2013, 10:35 PM

Comp Cams XR273HR. 220/224, .530/.534, 112 LSA camshaft. Gently used low miles. Great truck cam.

SOLD

gringoloco · 01-27-2013, 10:39 PM

LS2 camshaft and 'yellow' springs. Pulled from a low mile '06 Trailblazer.

SOLD

gringoloco · 01-27-2013, 10:44 PM

LSA oil pan. Includes pickup, dipstick, windage tray, bolts, and gasket. This is a new take-off from a never run engine.

SOLD

gringoloco · 01-27-2013, 10:56 PM

Pacesetter ceramic coated long tube headers, 72C2276. These are designed to fit a Trailblazer SS, but should fit our trucks.

SOLD

Number98 · 01-28-2013, 12:32 AM

Quote:

Originally Posted by gringoloco

LSA oil pan. Includes pickup, dipstick, windage tray, bolts, and gasket. This is a new take-off from a never run engine.

$150 plus shipping

I will take this if it's still up for grabs..

gringoloco · 01-27-2013, 11:08 PM

Bowtie Overdrives TV Made EZ bracket and cable to use a 700R4 behind an LS motor.

SOLD

gringoloco · 01-27-2013, 11:12 PM

Fel-Pro LS cylinder head bolts. Full set.

SOLD

gringoloco · 01-27-2013, 11:16 PM

Coolant temperature sender. Works with stock truck gauge, turned down to fit LS cylinder head.

SOLD

chevydog66 · 01-27-2013, 11:17 PM

How many miles on the 6.0?

gringoloco · 01-27-2013, 11:22 PM

Quote:

Originally Posted by chevydog66

How many miles on the 6.0?

Unknown. It was not original to the truck I pulled it from, which had about 250k on it. I do not know when it was replaced. This was from a '00 truck. It has decent, but not great compression. I had planned on a rebuild.

5150 · 01-27-2013, 11:59 PM

I'll take the temp sender.

Nohatch · 01-28-2013, 12:16 AM

Pm sent on headers, oil pan and sending unit. thanks

exploderjim · 01-28-2013, 07:25 AM

I will take the coil covers. Pm me instructions for payment and shipping.
Posted via Mobile Device

jmedero · 01-28-2013, 07:50 AM

Did I miss how much for the heads?
Posted via Mobile Device

gringoloco · 01-28-2013, 08:22 AM

Quote:

Originally Posted by exploderjim

I will take the coil covers. Pm me instructions for payment and shipping.
Posted via Mobile Device

Pm coming your way

Quote:

Originally Posted by jmedero

Did I miss how much for the heads?
Posted via Mobile Device

Oops! $250 plus ship
Posted via Mobile Device

1970 C10 MJW · 01-28-2013, 09:16 AM

I will take the heads..

yellowGT · 01-29-2013, 03:17 AM

What do u think shipping would be for the motor to 75040

BB72CHEVKT · 01-29-2013, 10:20 PM

Quote:

Originally Posted by yellowGT

What do u think shipping would be for the motor to 75040

Did you notice he is in Shreveport?

gringoloco · 01-30-2013, 12:21 AM

Quote:

Originally Posted by faribran

Gringoloco, where are you off to?
Posted via Mobile Device

We'll be speaking the Queen's English

Quote:

Originally Posted by yellowGT

What do u think shipping would be for the motor to 75040

Quote:

Originally Posted by BB72CHEVKT

Did you notice he is in Shreveport?

Yeah, wanna come get it? Meet me halfway?

gringoloco · 01-29-2013, 08:58 AM

It would have to go truck freight, probably a couple hundred. Try uship.com for a quote. I will put it on a standard pallet
Posted via Mobile Device

jmedero · 01-29-2013, 09:11 AM

What project are you parting out man?
Posted via Mobile Device

gringoloco · 01-29-2013, 09:30 AM

This was all slated for my 70 pickup, but we have overseas orders, so I'm purging the garage.
Posted via Mobile Device

jmedero · 01-29-2013, 10:16 AM

One of the guys that works for me just got deployed to Cuba. Good luck on the sale.
Posted via Mobile Device

01-27-2013, 10:23 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts 6.0 LQ4, complete with all accessories and wiring harness, ECM, and sensors (not pictured). Ran before pulled, though I had planned on a rebuild. SOLD I am willing to crate and ship or hold for pickup for a short time. I need this gone, it's sitting on my only engine stand! Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 02-01-2013 at 09:28 PM.

01-27-2013, 10:29 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts 799 cylinder heads, these are the same casting as the highly desirable 243/LS6 heads, but without the sodium filled valves. This is the best cathedral port head GM produced. Removed from an 18,000 mile engine. These are bolt-on and go heads. Fully assembled with rocker arms and covers. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-30-2013 at 12:29 AM.

01-27-2013, 10:35 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Comp Cams XR273HR. 220/224, .530/.534, 112 LSA camshaft. Gently used low miles. Great truck cam. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-31-2013 at 08:45 PM.

01-27-2013, 10:39 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts LS2 camshaft and 'yellow' springs. Pulled from a low mile '06 Trailblazer. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 10:44 PM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts LSA oil pan. Includes pickup, dipstick, windage tray, bolts, and gasket. This is a new take-off from a never run engine. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 08:23 AM.

01-27-2013, 10:56 PM	#6
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Pacesetter ceramic coated long tube headers, 72C2276. These are designed to fit a Trailblazer SS, but should fit our trucks. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 08:23 AM.

01-27-2013, 11:08 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Bowtie Overdrives TV Made EZ bracket and cable to use a 700R4 behind an LS motor. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 11:12 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Fel-Pro LS cylinder head bolts. Full set. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 11:16 PM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Coolant temperature sender. Works with stock truck gauge, turned down to fit LS cylinder head. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 12:56 AM.

01-27-2013, 11:17 PM	#11
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts How many miles on the 6.0? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

01-27-2013, 11:59 PM	#13
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts I'll take the temp sender. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-28-2013, 12:16 AM	#14
Nohatch Registered User Join Date: Jul 2006 Location: Ohio Posts: 83	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Pm sent on headers, oil pan and sending unit. thanks Last edited by Nohatch; 01-28-2013 at 12:33 AM.

01-28-2013, 07:25 AM	#15
exploderjim Registered User Join Date: Jan 2010 Location: Grimsby, Ontario Posts: 205	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts I will take the coil covers. Pm me instructions for payment and shipping. Posted via Mobile Device

01-28-2013, 07:50 AM	#16
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Did I miss how much for the heads? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-28-2013, 09:16 AM	#18
1970 C10 MJW Registered User Join Date: Aug 2012 Location: Indiana Posts: 470	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts I will take the heads.. __________________ 70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol



Register or Log In To remove these advertisements.

01-29-2013, 03:17 AM	#19
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts What do u think shipping would be for the motor to 75040 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

01-29-2013, 08:58 AM	#22
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts It would have to go truck freight, probably a couple hundred. Try uship.com for a quote. I will put it on a standard pallet Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-29-2013, 09:11 AM	#23
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts What project are you parting out man? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-29-2013, 09:30 AM	#24
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts This was all slated for my 70 pickup, but we have overseas orders, so I'm purging the garage. Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-29-2013, 10:16 AM	#25
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts One of the guys that works for me just got deployed to Cuba. Good luck on the sale. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.