The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-05-2013, 09:34 AM   #1
chadcampbell00
Registered User
 
chadcampbell00's Avatar
 
Join Date: Jan 2013
Location: Holden LA
Posts: 76
Proportioning valves

I bought a '70 Jimmy a few weeks ago and the rear breaks have a tendency to lock up at more sudden than normal breaking. It's pretty bad on gravel and causes the rear end to slide sideways. The previous owner installed all new braking components (booster, master cylinder, drums, shoes and the rubber lines). It has drum brakes front and rear. I noticed that it has a proportioning valve but I thought only vehicles with front disk brakes had that. I'm not real familiar with proportioning valves so if anyone is I could use some advise. Did these models come factory with them or was it added? Should I replace it or bypass it? I have seen some adjustable ones online, should I try one of those? Or maybe my problem has nothing to do with that. Both rear wheels lock up so I don't think it's a cylinder problem and they should be self adjusting. They release when I let off the brake so I don't think they are too tight anyways. Any advise?
Posted via Mobile Device
chadcampbell00 is offline   Reply With Quote
Old 02-05-2013, 07:17 PM   #2
cleszkie
Registered User
 
cleszkie's Avatar
 
Join Date: Feb 2003
Location: Santa Ana, CA
Posts: 2,191
Re: Proportioning valves

Before you go bypassing or replacing things, check that the rear brake shoes were installed properly. Each pair of shoes has one with a shorter length of brake lining and one with a longer length of brake lining. If my memory serves me, the shoe with the longer brake lining should be installed in the forward position on the backing plate. If this is reversed, the drum brakes can have a tendency to lock up. If I have this backwards, hopefully someone here will correct me. I swapped in disc brakes on the rear a while back, and have let all my drum brake knowledge dwindle.
cleszkie is offline   Reply With Quote
Old 02-05-2013, 09:46 PM   #3
pound41
Registered User
 
Join Date: Dec 2002
Location: Northern Virginia
Posts: 1,268
Re: Proportioning valves

it had a prop valve on it when it came from factory. I don't think it had a bleeder on it. I would look at adjustments on the drums etc before I start swapping out valves
pound41 is offline   Reply With Quote
Old 02-05-2013, 10:15 PM   #4
chadcampbell00
Registered User
 
chadcampbell00's Avatar
 
Join Date: Jan 2013
Location: Holden LA
Posts: 76
Re: Proportioning valves

Thanks. I had my tires balanced the other day and while they had them off I took the brake drums off just to take a quick look. They both came off with ease so I don't think that they need adjusting but I'm gonna double check that anyways. I will also take them back off and make sure the shoes are on correctly.
Posted via Mobile Device
chadcampbell00 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com