Swingsax68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67Project · 06-18-2003, 09:31 AM

I have been unable to access the pm that was sent. I you could resend that message to my personal email, I would appreciate it.

You can send that message to mnovak2253@hotmail.com.

Thanks,
Mark

67Project · 06-18-2003, 11:03 PM

ttt

SWINGSAX68 · 06-19-2003, 01:20 AM

it wasn't much...I was trying to get you some measure ments...but was too busy this week....helped my dad fire up his 78 after 4 years.
but I know someone on this board had the actual factory schematics of the bed wood. BUt I can get you pretty accurate measurements...of my bed...it really isn't too tough......and about $60 for Yellow pine @ home depot, $20 for varnish and sand paper, $150 for stainless steel bed strips and bed bolts from LMC, and some pocket change for long 5/8 or so carriage bolts for the frame bolt up and your all set for a do it yourself wood bed.
oh yeah and about two days.....
my truck is broke right now, so it will be maybe till this weekend to get measurements from my home town.....I'll try!!!
-Roger

06-18-2003, 09:31 AM	#1
67Project Registered User Join Date: Mar 2001 Location: Houston, TX, USA Posts: 44	Swingsax68 I have been unable to access the pm that was sent. I you could resend that message to my personal email, I would appreciate it. You can send that message to mnovak2253@hotmail.com. Thanks, Mark __________________ Mark Novak 1967 Work in Progress

06-18-2003, 11:03 PM	#2
67Project Registered User Join Date: Mar 2001 Location: Houston, TX, USA Posts: 44	ttt __________________ Mark Novak 1967 Work in Progress

06-19-2003, 01:20 AM	#3
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	it wasn't much...I was trying to get you some measure ments...but was too busy this week....helped my dad fire up his 78 after 4 years. but I know someone on this board had the actual factory schematics of the bed wood. BUt I can get you pretty accurate measurements...of my bed...it really isn't too tough......and about $60 for Yellow pine @ home depot, $20 for varnish and sand paper, $150 for stainless steel bed strips and bed bolts from LMC, and some pocket change for long 5/8 or so carriage bolts for the frame bolt up and your all set for a do it yourself wood bed. oh yeah and about two days..... my truck is broke right now, so it will be maybe till this weekend to get measurements from my home town.....I'll try!!! -Roger __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.