WA Long Stepside bed angles - just pay shipping

[stomper]

LONG bed stepside angle strip set - steel. LMC #38-7700. If anyone is actually fixing a longbed step side you deserve some free parts! Somehow I got the long set and I needed the short. LMC was gracious enough to send me the short ones I need and shipping these back doesn't make sense. If anyone can use these you can have them. Just pay for the cost of shipping. To make it easy let's just call it $40 shipped - I think that's what LMC charged me.

[stomper]

Shipping is probably less than $40. Whatever it works out to be that's what you can send me. Anyone?

[gdavis]

what is the difference between short and long for the strips. is it the length? If that is all the difference I will take them.

[stomper]

There are pre-punched holes in them and the LWB and SWB patterns are different. I could not use them in a way I wouldn't have to drill a number of holes and end up with at least 3 extra holes on each side. If that wouldn't bother you they would work by cutting and drilling. I decided after the effort to remove the old ones (drilling out dozens of spot welds) and paint the new ones, I didn't want to compromise. Let me know.
Posted via Mobile Device

[gdavis]

Originally Posted by stomper

There are pre-punched holes in them and the LWB and SWB patterns are different. I could not use them in a way I wouldn't have to drill a number of holes and end up with at least 3 extra holes on each side. If that wouldn't bother you they would work by cutting and drilling. I decided after the effort to remove the old ones (drilling out dozens of spot welds) and paint the new ones, I didn't want to compromise. Let me know.
Posted via Mobile Device

No I will pass. I don't want to drill no more holes in the bed. thanks so much.

[RandyF]

Paypal ready, sending you a pm for payment info.

[stomper]

Shipped to RandyF. PM'd. Enjoy!
Posted via Mobile Device