|
|
|
04-21-2013, 01:27 PM
|
#1 |
|
Registered User
Join Date: Sep 2012
Location: West Paducah,KY
Posts: 26
|
Need some help
so my 72 blazer was running alittle rough the other day so i decided to change the carb, plugs, plug wires, dist. cap, and rotor. i did all this now it wont start. Checked spark at the wires, nothing. Check spark coming from the coil, nothing. Any suggestions on why it started this after i changed all this. Is there a ground i knocked off without realizing or can a coil just go from starting to bad like this.
|
|
|
|
04-21-2013, 02:14 PM
|
#2 |
|
Senior Member
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
|
Re: Need some help
My first guess would be the points. Are they opening?
|
|
|
|
|
04-21-2013, 03:38 PM
|
#3 |
|
Registered User
Join Date: Sep 2012
Location: West Paducah,KY
Posts: 26
|
Re: Need some help
the points arent moving. whats the screw under them that you can get to through the door on the cap for. that may have been moved.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
