TX 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CheyenneSuper72 · 05-19-2013, 02:03 PM

Grill is in good condition other than the damage On the passenger side. See picture. Comes with parking lights, bezels and brackets. $150.

I saved the rear bed side sections off of a truck that I tore apart. They have no damage in the tail light area. These were cut off of a stock gm long bed. I can cut these up however you would like. They were cut in the middle of the wheel housing. I have both sides. These also have te holes for 69-72 moulding. Only have picture of one side. $100 each cut to your specs.

Pm me with any questions. Thanks!!!
Posted via Mobile Device

CheyenneSuper72 · 05-19-2013, 02:08 PM

Posted via Mobile Device

CheyenneSuper72 · 05-19-2013, 02:13 PM

Posted via Mobile Device

PD1292 · 05-20-2013, 08:41 AM

Ill take the grill if its not to far to drive. Where are you in Texas. Pm or just state a mileage from San Angelo. Thanks Barry

Route-66 · 05-20-2013, 08:53 AM

I will take the right side bedside panel cut right behind the start of the wheel well if you will give me an approximate shipping cost to 35976. I mainly have damage around the tail light section.

CheyenneSuper72 · 05-20-2013, 08:18 PM

Right side panel sold. Sale pending on grill....
Posted via Mobile Device

*mrdana60* · 05-21-2013, 04:44 AM

Do you have the driver side? Pics? I ll take it if we can work a deal. Shipping to 35960

CheyenneSuper72 · 05-21-2013, 08:33 AM

Pm sent
Posted via Mobile Device

PD1292 · 05-23-2013, 07:11 AM

I am out on the grill, too far of a drive for me. thanks anyway. TTT for you.

Evaded · 05-23-2013, 08:11 AM

May be interested in grill depending on your location...
Posted via Mobile Device

byk71913 · 05-31-2013, 11:17 AM

ill take the grille if you will ship?? im in Arkansas! thanks

74baggedbug · 05-31-2013, 11:39 AM

Where in Texas are you located at? I'm interested in grill thanks
Posted via Mobile Device

**68350** · 05-31-2013, 12:58 PM

Do you still have the drivers side bedside?
Posted via Mobile Device

CheyenneSuper72 · 05-31-2013, 06:00 PM

Pm sent on the grill. If evaded passes I may ship. Located close to Amarillo tx. Drivers bedside is still available. Thanks
Posted via Mobile Device

Undone · 05-31-2013, 06:42 PM

Shipping on LH Bedside patch to 30530.

CheyenneSuper72 · 05-31-2013, 07:10 PM

Depending on how much you need shipping will range from $25-45. Get me a measurement and I will let you know. Thanks.
Posted via Mobile Device

**68350** · 05-31-2013, 07:59 PM

I dont reallly need the taillight area if someone else needed it, I just want to fix this section shown above

CheyenneSuper72 · 06-02-2013, 12:15 PM

PM sent to 68350, Undone is next on the bedside.....grill is still for sale. Thanks!

**68350** · 06-02-2013, 02:21 PM

Payment sent
Posted via Mobile Device

CheyenneSuper72 · 06-02-2013, 02:41 PM

Bedsides are SOLD!! Grill is still available. Thanks.

mytruck70 · 06-03-2013, 11:35 PM

are those bed emblems for sell ?

CheyenneSuper72 · 06-03-2013, 11:40 PM

Those were pictures of another members truck to show me where to cut the replacement panel. Might pm him. Thanks
Posted via Mobile Device

Cohl · 06-05-2013, 02:52 AM

Is the grill still available? If so, would you ship it to Nevada? Thanks!
Posted via Mobile Device

CheyenneSuper72 · 06-05-2013, 06:40 AM

Pm sent
Posted via Mobile Device

Hard_Rain420 · 06-05-2013, 09:23 AM

Do you have the lower RH side molding? If so how much shipped to FL 32906?

05-19-2013, 02:03 PM	#1
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Grill is in good condition other than the damage On the passenger side. See picture. Comes with parking lights, bezels and brackets. $150. I saved the rear bed side sections off of a truck that I tore apart. They have no damage in the tail light area. These were cut off of a stock gm long bed. I can cut these up however you would like. They were cut in the middle of the wheel housing. I have both sides. These also have te holes for 69-72 moulding. Only have picture of one side. $100 each cut to your specs. Pm me with any questions. Thanks!!! Posted via Mobile Device Attached Images Last edited by CheyenneSuper72; 05-19-2013 at 02:34 PM. Reason: Spell check

05-19-2013, 02:08 PM	#2
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Posted via Mobile Device Attached Images

05-19-2013, 02:13 PM	#3
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Posted via Mobile Device Attached Images

05-20-2013, 08:41 AM	#4
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Ill take the grill if its not to far to drive. Where are you in Texas. Pm or just state a mileage from San Angelo. Thanks Barry

05-20-2013, 08:53 AM	#5
Route-66 Registered User Join Date: Apr 2013 Location: Guntersville, AL Posts: 24	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels I will take the right side bedside panel cut right behind the start of the wheel well if you will give me an approximate shipping cost to 35976. I mainly have damage around the tail light section.

05-20-2013, 08:18 PM	#6
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Right side panel sold. Sale pending on grill.... Posted via Mobile Device

05-21-2013, 04:44 AM	#7
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Do you have the driver side? Pics? I ll take it if we can work a deal. Shipping to 35960

05-21-2013, 08:33 AM	#8
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Pm sent Posted via Mobile Device

05-23-2013, 07:11 AM	#9
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels I am out on the grill, too far of a drive for me. thanks anyway. TTT for you.

05-23-2013, 08:11 AM	#10
Evaded Registered User Join Date: Apr 2013 Location: San Antonio TX Posts: 424	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels May be interested in grill depending on your location... Posted via Mobile Device __________________ If I see a Zombie.. Im runnin it over with my Truck.

05-31-2013, 11:17 AM	#11
byk71913 Registered User Join Date: Apr 2013 Location: hot springs arkansas Posts: 1	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels ill take the grille if you will ship?? im in Arkansas! thanks

05-31-2013, 11:39 AM	#12
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Where in Texas are you located at? I'm interested in grill thanks Posted via Mobile Device

05-31-2013, 12:58 PM	#13
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Do you still have the drivers side bedside? Posted via Mobile Device __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-31-2013, 06:00 PM	#14
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Pm sent on the grill. If evaded passes I may ship. Located close to Amarillo tx. Drivers bedside is still available. Thanks Posted via Mobile Device

05-31-2013, 06:42 PM	#15
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Shipping on LH Bedside patch to 30530.



Register or Log In To remove these advertisements.

05-31-2013, 07:10 PM	#16
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Depending on how much you need shipping will range from $25-45. Get me a measurement and I will let you know. Thanks. Posted via Mobile Device

05-31-2013, 07:59 PM	#17
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels I dont reallly need the taillight area if someone else needed it, I just want to fix this section shown above __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

06-02-2013, 12:15 PM	#18
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels PM sent to 68350, Undone is next on the bedside.....grill is still for sale. Thanks!

06-02-2013, 02:21 PM	#19
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Payment sent Posted via Mobile Device __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

06-02-2013, 02:41 PM	#20
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Bedsides are SOLD!! Grill is still available. Thanks.

06-03-2013, 11:35 PM	#21
mytruck70 Registered User Join Date: Apr 2012 Location: clayton, NC Posts: 139	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels are those bed emblems for sell ?

06-03-2013, 11:40 PM	#22
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Those were pictures of another members truck to show me where to cut the replacement panel. Might pm him. Thanks Posted via Mobile Device

06-05-2013, 02:52 AM	#23
Cohl Registered User Join Date: Apr 2009 Location: Gardnerville, NV Posts: 134	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Is the grill still available? If so, would you ship it to Nevada? Thanks! Posted via Mobile Device

06-05-2013, 06:40 AM	#24
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Pm sent Posted via Mobile Device

06-05-2013, 09:23 AM	#25
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1969/70 Complete Grill Assembly / GM Rear Bedside Patch Panels Do you have the lower RH side molding? If so how much shipped to FL 32906?

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode