NY Porter built a arms, sectioned crossmember, and unisteer

[2002yanks]

brand new unisteer knuckle and shaft kit for stock steering setup to clear a arms(plan was to raise steering box and linkage up 2" also to keep stock configuration) $250 shipped/ins/pp fees for the unisteer stuff(really nice stuff and chrome finish).


-set of PB 1inch forward standard width lower a arms for stock crossmember. Has 71/72 ball joints. Still new not mounted. I got them and they were painted black. They need a touch up. Were chipped in shipment. ****uppers have been sold lowers sold****
-set of ss7 bags(brand new) ***sold****
-set of pb extreme shock relocators(bare steel) and kyb shocks(brand new)****sold****
-I also have a sectioned crossmember(2") ****sold****

payment by paypal(add 3% to cover the fees or send as gift-your choice) or postal money order.

[2002yanks]

heres pic(sorry for bad pic-they are in the trunk of my car and its darkout). cross shafts were polished up.

[mixermike]

So these are 1 inch narrower than stock and 1 inch forward?
Posted via Mobile Device

[2002yanks]

1" forward standard width. see first post.

[2002yanks]

if interested in a arms and need bags/shocks i might also have f/s;
-set of ss7 bags(brand new) add $200
-set of pb extreme shock relocators(bare steel) and kyb shocks(brand new) add $200

[mixermike]

Will dominator 2600's fit in these arms ?
Posted via Mobile Device

[2002yanks]

whats the bag diam? the ss7`s are 7"

[mixermike]

I think they are 71/2"-8"
Posted via Mobile Device

[2002yanks]

are the mounting hole/holes on the bottom centered on the bag? if they are i dont think they will work. 7.5 would be the biggest you could go without rubbing. i think thats why most run ss7`s with there pb kits. they dont expand. they stay 7".

[2002yanks]

looks like i`m wrong. this was posted in your thread in the suspension forum by nate.

Good to go! The dominator fits like a glove.

Nate

[mixermike]

Pm sent
Posted via Mobile Device

[2002yanks]

adjusted the price to $1050 shipped. same as from pb but no added shipping cost(or up to 6 week wait).

if i go the dropmember route i will also have a sectioned crossmember(2") and a brand new unisteer knuckle and shaft kit for stock steering setup to clear a arms(plan was to raise steering box and linkage up 2" also to keep stock configuration) would do $275 plus actual shipping for the crossmember and $275 shipped for the unisteer stuff(really nice stuff and chrome finish).

nothing wrong with anything here. just freed up some extra money to make it happen(if i can move some of this). didnt plan on having the extra cash, just happened. so triing to get what i wanted from the start. if not i will keep on moving forward with this stuff. thanks!
Kevin

[lolife99]

Would you consider trading for anything?

[2002yanks]

as of now for the arms i cant trade. i would need the cash to get the new setup(unless i sold the rest of the stuff). but you never know. i also have my extra rear air setup for sale if that sold i could trade for parts needed. pm what you have(and what your interested in) and i`ll keep you in mind.

[lolife99]

Originally Posted by 2002yanks

as of now for the arms i cant trade. i would need the cash to get the new setup(unless i sold the rest of the stuff). but you never know. i also have my extra rear air setup for sale if that sold i could trade for parts needed. pm what you have(and what your interested in) and i`ll keep you in mind.

I'm interested in your arms,... just don't know what you need.

Can you take a measurement from the backside of the cross shaft to the center of the balljoint.
Mine measure 18".
(my tape moved when I took this picture,... but it's 18" on my set).

[2002yanks]

looks like you measured from the back of the cross shaft to the center of bj correct(just making sure)? give me a few and i`ll check(i`m at work--ssssshhhh dont tell on me)lol. looks like yours are the narrow version but not the forward version?

[lolife99]

Originally Posted by 2002yanks

looks like you measured from the back of the cross shaft to the center of bj correct(just making sure)?
Correct.


give me a few and i`ll check(i`m at work--ssssshhhh dont tell on me)lol. looks like yours are the narrow version but not the forward version?

Mine are the forward version.
Standard width.

[2002yanks]

well alittle disappointing news(to me). these are not the narrow version. they measure the same as lowlifes 18". so they are the forward version standard width. still great for centering your rims and runing bigger offset rims.

thank you kieth(lowlife99) for having me double check it. that could of been a disaster. i got them awhile ago and didnt need them yet. i will change my posts on here to reflect that.

[2002yanks]

alright i can sell them. i can do alittle better on the price if someone wants the arms with the bags or shocks/relocators or all. want to sell asap so i can pay for mine.

[lolife99]

Man,... I was hoping they were the narrowed version.
Thanks for checking.
Good luck with the sale.
Posted via Mobile Device

[brewtality]

Would you sell just the Porterbuilt upper bag plates(w/hardware) and the bags together? Price shipped?
Posted via Mobile Device

[2002yanks]

Originally Posted by brewtality

Would you sell just the Porterbuilt upper bag plates(w/hardware) and the bags together? Price shipped?
Posted via Mobile Device

i would need to get $275 shipped for them. i just paid $235 shipped for the bags.

[brewtality]

I will take em. PM sent
Posted via Mobile Device

[2002yanks]

got it. thanks brewtality! ss7 bags and pb upper bag plates sold. rest still available.

[2002yanks]

pics of shocks/relocators, crossmember, and unisteer.