Door wire loom or boot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyNewb · 08-06-2013, 02:47 PM

Looked around a bit, but could not seem to find anything. Anyone had luck with a door loom to protect wiring in the junction from the A pillar to the door? Might just see if I can find a couple at the junkyard. Looking for anyone that can say "hey, get the loom/boot off of a..., it will work great!" just hiding the power lock wires, but have had one cut already and want to avoid in the future!

**nitrosport_5** · 08-06-2013, 03:19 PM

I am interested as well. Bought some on ebay that looked like they would work from a new-er corvette.. but they were huge so back to the drawing board!

08-06-2013, 02:47 PM	#1
ChevyNewb Registered User Join Date: Jan 2012 Location: Venice, FL Posts: 153	Door wire loom or boot Looked around a bit, but could not seem to find anything. Anyone had luck with a door loom to protect wiring in the junction from the A pillar to the door? Might just see if I can find a couple at the junkyard. Looking for anyone that can say "hey, get the loom/boot off of a..., it will work great!" just hiding the power lock wires, but have had one cut already and want to avoid in the future! __________________ '68 Longbed Stepper. Mango Tango

08-06-2013, 03:19 PM	#2
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Re: Door wire loom or boot I am interested as well. Bought some on ebay that looked like they would work from a new-er corvette.. but they were huge so back to the drawing board! __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.