question about brakes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigmac73** · 08-09-2013, 09:02 AM

I am converting my 72 C-10 to power brakes, Summit racing recommends that i use

http://www.summitracing.com/parts/CLP-6772BB2-11/

and they say this is all i need for the conversion,

Is there any type of other extension rod i need to find for the pedal??? Any thoughts??

Mike

68gmsee · 08-09-2013, 10:09 AM

I'm not recommended one vendor over an other but mine looked like this. http://www.brotherstrucks.com/prodin...number=KORN772

I would check on the vendor site for local vendors. Also, I would give them a call and ask questions. A lot of them have everything you need and some have done the work themselves.

GASoline71 · 08-09-2013, 10:25 AM

Your 72 C10 doesn't have power brakes from the factory?

I got a Booster and Master cylinder with proportioning valve from CPP to replace my 40 year old worn out unit. Works like a charm.

Gary

**bigmac73** · 08-09-2013, 01:15 PM

Nope it is an odd model, power steering but no power brakes??? Go figure
anyways i was going to go with the CPP from summit, i just was wondering if i am going to have to go hunting a odd ball part or something, like a different pedal rod or something small like that

68gmsee · 08-09-2013, 07:20 PM

I'm not familiar with the one you're looking at but you will need the brake pedal to booster bracket link. As I mentioned, if you call some of the vendors, some of them can fix you up with what you need. Be sure and readjust the brake light switch if you have to.

08-09-2013, 09:02 AM	#1
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	question about brakes I am converting my 72 C-10 to power brakes, Summit racing recommends that i use http://www.summitracing.com/parts/CLP-6772BB2-11/ and they say this is all i need for the conversion, Is there any type of other extension rod i need to find for the pedal??? Any thoughts?? Mike

08-09-2013, 10:09 AM	#2
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: question about brakes I'm not recommended one vendor over an other but mine looked like this. http://www.brotherstrucks.com/prodin...number=KORN772 I would check on the vendor site for local vendors. Also, I would give them a call and ask questions. A lot of them have everything you need and some have done the work themselves. __________________ 68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...

08-09-2013, 01:15 PM	#4
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: question about brakes Nope it is an odd model, power steering but no power brakes??? Go figure anyways i was going to go with the CPP from summit, i just was wondering if i am going to have to go hunting a odd ball part or something, like a different pedal rod or something small like that

08-09-2013, 07:20 PM	#5
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: question about brakes I'm not familiar with the one you're looking at but you will need the brake pedal to booster bracket link. As I mentioned, if you call some of the vendors, some of them can fix you up with what you need. Be sure and readjust the brake light switch if you have to. __________________ 68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.