Battery Tray Bracket - Jack Hardware? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tucsonjwt · 08-12-2013, 01:47 PM

Does anyone know the function of this bracket on the battery tray for my 83 C20? I assume that is has something to do with the jack which is supposed to mount nearby. I am planning on installing the factory jack on the inner fender, so any pics of how this attaches would be appreciated. I am not sure that the picture shows the proper location for this bracket (with two captive nuts) or if it just ended up there by chance. Pics on the whole jack installation for an 83 would be helpful also. Thanks.

INSIDIOUS '86 · 08-12-2013, 07:42 PM

Looks like that's just fender mounting of the tray. I've never seen that myself
Posted via Mobile Device

nheller76 · 08-12-2013, 07:48 PM

I think the hold down screwed into it?
Posted via Mobile Device

tucsonjwt · 08-12-2013, 11:00 PM

It is not needed to secure the battery tray. I found two holes under the tray which line up with the holes in that bracket, but it the bracket is lined up with those holes then I see no purpose for it with regard to securing the jack. In any case, it looks like an OEM item. Keith: why did you use this bracket?

08-12-2013, 01:47 PM	#1
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Battery Tray Bracket - Jack Hardware? Does anyone know the function of this bracket on the battery tray for my 83 C20? I assume that is has something to do with the jack which is supposed to mount nearby. I am planning on installing the factory jack on the inner fender, so any pics of how this attaches would be appreciated. I am not sure that the picture shows the proper location for this bracket (with two captive nuts) or if it just ended up there by chance. Pics on the whole jack installation for an 83 would be helpful also. Thanks. Attached Images

08-12-2013, 07:42 PM	#2
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Battery Tray Bracket - Jack Hardware? Looks like that's just fender mounting of the tray. I've never seen that myself Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

08-12-2013, 07:48 PM	#3
nheller76 Registered User Join Date: Sep 2012 Location: salem oregon Posts: 281	Re: Battery Tray Bracket - Jack Hardware? I think the hold down screwed into it? Posted via Mobile Device __________________ Faith and Patience with my truck, that is what i pray for every day! See my build http://67-72chevytrucks.com/vboard/s...d.php?t=580013

08-12-2013, 11:00 PM	#4
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: Battery Tray Bracket - Jack Hardware? It is not needed to secure the battery tray. I found two holes under the tray which line up with the holes in that bracket, but it the bracket is lined up with those holes then I see no purpose for it with regard to securing the jack. In any case, it looks like an OEM item. Keith: why did you use this bracket?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.