interior redo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 08-27-2013, 10:16 PM

ok after my road trip my butt could not take the broken bench seat any more so it is time to re do my interior. this is a little before and after and so it begins don't mind the wires!
stay tuned.....................

Floor is rust free!!

just to make sure a coat of rust prevention

ChefCy · 08-28-2013, 06:35 PM

Looks good brotha!

gulfcoast66 · 08-28-2013, 07:26 PM

Rust free Man I know your happy bout that, half the job already done!! Floor looks good....
Posted via Mobile Device

**slepysal** · 08-28-2013, 11:32 PM

Thanks. My plans are to do a color change ,swap the spoon style gas pedal, swap in a van tilt column, retro wood steering wheel , new billet dash insert, tach, new carpet , gas tank cover , stereo upgrade , small center console and these working electric range rover bucket seats. all on a budget !
Name: 00K0K_jm5x3LX0zzo_600x450.jpg
Views: 802
Size: 19.2 KB

Name: 00K0K_jm5x3LX0zzo_600x450.jpg
Views: 802
Size: 19.2 KB

**slepysal** · 09-02-2013, 10:47 PM

Well my mock up went a bit to far

I had intended to install the seats to "just see how they fit"
Then I thought I would see how my "e-bay deal" carpet would fit. Well it didn't. It was about 6 inches short width wise. Not wanting to deal with the hassle of returning it and since I got it cheep , I cut it right down the middle. Fit good after that.
I plan on adding a console later so it will cover the gap. In the mean time I made a panel and covered it with some black carpet .
More to come

**slepysal** · 09-02-2013, 10:50 PM

one more not bad for 50.00 seats !

WhippinSaw · 09-02-2013, 11:07 PM

That was a quick interior change. Dig the buckets, they look good and comfortable, ebay sucks for returns, look like you came up with a good remedy for the carpet. Karooze

64chevtruck · 09-03-2013, 02:51 AM

Nice job, Im doing the same thing to my 64 at this second. Your floor looks alot better than mine though,

Take care

**slepysal** · 09-03-2013, 09:25 PM

thanks post some pics of yours

sandiego65 · 09-03-2013, 10:19 PM

Looking good man I always liked the color of the seats and the dark brown piping real classy.
Posted via Mobile Device

ChefCy · 09-04-2013, 01:02 PM

LOOKS GREAT Sal!!!

gonna hit up King n Story..LOL
remember when they used to divert us to 101?and we would just cruise the freeway back to Santa Clara St and start all over again.

**slepysal** · 09-04-2013, 01:12 PM

Yup! I lived ( still do ) about 1/2 a mile from King & Story , behind Jack"s liquers.
When it would get real packed it was a trip trying to tell the cops I had to go past there road blocks to get home. They still have the "NO CRUSING" signs posted.

ChefCy · 09-04-2013, 01:21 PM

I remember when they put those up. I seen them again when I went back home to visit last year (been since 98 since ive been home before last year). My son and his family still live there.

gulfcoast66 · 09-04-2013, 06:01 PM

Inside looking good Sal... Seats look really good, did you have to modify the tracks on the bottom..??
Posted via Mobile Device

61_FL_Apache · 09-04-2013, 06:30 PM

Nice job Sal!!

**slepysal** · 09-05-2013, 12:30 AM

Quote:

Originally Posted by gulfcoast66

Inside looking good Sal... Seats look really good, did you have to modify the tracks on the bottom..??
Posted via Mobile Device

I had to "massage" them a little.

Quote:

Originally Posted by 61_FL_Apache

Nice job Sal!!

Thanks. I just got done installing some surplus Hummer 3 point seat belts.
As I had mentioned this a budget re do ,Craig's list, E-Bay have helped .
stay tuned

**slepysal** · 09-14-2013, 11:46 PM

Well things have been crazy around here, so progress has been slow.
I installed a different stereo. Here is a pic of the three point sea belts. Soon as things settle down I'll get the rest done.

Blue666 · 09-15-2013, 05:01 PM

What did you use for the center console?

**slepysal** · 09-16-2013, 10:44 AM

Quote:

Originally Posted by Blue666

What did you use for the center console?

I picked it up at a yard sale . I was going to make one , but this one worked out fine. It just sits on the floor now but fits great, and dosn't slide around.

ChefCy · 09-16-2013, 06:35 PM

Lookin good!! I like the arm rests!! and cup holders

**slepysal** · 09-17-2013, 10:51 AM

Quote:

Originally Posted by ChefCy

Lookin good!! I like the arm rests!! and cup holders

Thanks bro !

gofastnut · 09-18-2013, 02:23 PM

Looks good man!

08-27-2013, 10:16 PM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	interior redo ok after my road trip my butt could not take the broken bench seat any more so it is time to re do my interior. this is a little before and after and so it begins don't mind the wires! stay tuned..................... Floor is rust free!! just to make sure a coat of rust prevention __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 08-29-2013 at 12:19 PM.

08-28-2013, 06:35 PM	#2
ChefCy Registered User Join Date: Apr 2013 Location: Houston,TX.....Hometown of San Jose Cali Posts: 361	Re: interior redo Looks good brotha! __________________ 63 big window lwb bagged and shaved

08-28-2013, 07:26 PM	#3
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: interior redo Rust free Man I know your happy bout that, half the job already done!! Floor looks good.... Posted via Mobile Device __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

08-28-2013, 11:32 PM	#4
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: interior redo Thanks. My plans are to do a color change ,swap the spoon style gas pedal, swap in a van tilt column, retro wood steering wheel , new billet dash insert, tach, new carpet , gas tank cover , stereo upgrade , small center console and these working electric range rover bucket seats. all on a budget ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-02-2013, 10:47 PM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: interior redo Well my mock up went a bit to far I had intended to install the seats to "just see how they fit" Then I thought I would see how my "e-bay deal" carpet would fit. Well it didn't. It was about 6 inches short width wise. Not wanting to deal with the hassle of returning it and since I got it cheep , I cut it right down the middle. Fit good after that. I plan on adding a console later so it will cover the gap. In the mean time I made a panel and covered it with some black carpet . More to come __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-02-2013, 10:50 PM	#6
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: interior redo one more not bad for 50.00 seats ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-02-2013, 11:07 PM	#7
WhippinSaw Registered User Join Date: Aug 2012 Location: Lisle Illinois Posts: 602	Re: interior redo That was a quick interior change. Dig the buckets, they look good and comfortable, ebay sucks for returns, look like you came up with a good remedy for the carpet. Karooze

09-03-2013, 02:51 AM	#8
64chevtruck Registered User Join Date: Aug 2013 Location: Rochester Wa. Posts: 395	Re: interior redo Nice job, Im doing the same thing to my 64 at this second. Your floor looks alot better than mine though, Take care

09-03-2013, 09:25 PM	#9
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: interior redo thanks post some pics of yours __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-03-2013, 10:19 PM	#10
sandiego65 Registered User Join Date: Dec 2011 Location: san diego california Posts: 143	Re: interior redo Looking good man I always liked the color of the seats and the dark brown piping real classy. Posted via Mobile Device

09-04-2013, 01:02 PM	#11
ChefCy Registered User Join Date: Apr 2013 Location: Houston,TX.....Hometown of San Jose Cali Posts: 361	Re: interior redo LOOKS GREAT Sal!!! gonna hit up King n Story..LOL remember when they used to divert us to 101?and we would just cruise the freeway back to Santa Clara St and start all over again. __________________ 63 big window lwb bagged and shaved

09-04-2013, 01:12 PM	#12
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: interior redo Yup! I lived ( still do ) about 1/2 a mile from King & Story , behind Jack"s liquers. When it would get real packed it was a trip trying to tell the cops I had to go past there road blocks to get home. They still have the "NO CRUSING" signs posted. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-04-2013, 01:21 PM	#13
ChefCy Registered User Join Date: Apr 2013 Location: Houston,TX.....Hometown of San Jose Cali Posts: 361	Re: interior redo I remember when they put those up. I seen them again when I went back home to visit last year (been since 98 since ive been home before last year). My son and his family still live there. __________________ 63 big window lwb bagged and shaved

09-04-2013, 06:01 PM	#14
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: interior redo Inside looking good Sal... Seats look really good, did you have to modify the tracks on the bottom..?? Posted via Mobile Device __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

09-04-2013, 06:30 PM	#15
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: interior redo Nice job Sal!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)



Register or Log In To remove these advertisements.

09-14-2013, 11:46 PM	#17
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: interior redo Well things have been crazy around here, so progress has been slow. I installed a different stereo. Here is a pic of the three point sea belts. Soon as things settle down I'll get the rest done. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-15-2013, 05:01 PM	#18
Blue666 Registered User Join Date: Dec 2008 Location: Andrews, NC Posts: 194	Re: interior redo What did you use for the center console?

09-16-2013, 06:35 PM	#20
ChefCy Registered User Join Date: Apr 2013 Location: Houston,TX.....Hometown of San Jose Cali Posts: 361	Re: interior redo Lookin good!! I like the arm rests!! and cup holders __________________ 63 big window lwb bagged and shaved

09-18-2013, 02:23 PM	#22
gofastnut Registered User Join Date: Feb 2011 Location: Williams, CA Posts: 760	Re: interior redo Looks good man! __________________ Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.