MI 67' Chevy C20 2wd parts I don't need

[Matts Kustoms]

Hey guys I am selling off the parts I don't need to a 1967 Chevy C20 2wd originally a 292 straight six with 4 speed on the floor. Here is what I have so far:

1) Hood no emblems, perfect patina all solid except front lip shown in pictures. Asking $200, moved to another post
2) 70-71 8' bed from Kentucky, includes tailgate and all hardware, lenses and bezels, harness and fender wells. Surface rust with only a few minor holes, floor solid. Asking $350 Sold
3) Cab with clean title, comes with everything you see except e-brake handle and steering wheel, rusted floors at rockers, bad cab corners, and rough rockers. Asking $300
4) Driver & passenger fender re-pop. Asking $100 each, moved to another post
5) Driver and passenger door, all glass good, rust on bottom and bad driver hinge area. Asking $100pair or $60each
6) Drive shaft two piece measures 77" end to end with new bearing. Asking $50
7) Hood hinges, good driver loose passenger. Asking $10 for the pair
8) Mirrors, rusty only passenger glass. Asking $10 for pair
9) Engine harness unknown condition but truck was a driver when pulled. Asking $25
10) Last picture everything $5 each

11) Willing to let everything I have left go as a package deal for $450 (cab, frame, any misc components that aren't already spoken for, etc) local pickup.

Everything large is pickup, and small stuff you pay shipping, thanks.
Posted via Mobile Device

[Matts Kustoms]

Pics
Posted via Mobile Device

[Matts Kustoms]

Posted via Mobile Device

[Matts Kustoms]

Pic 2
Posted via Mobile Device

[Matts Kustoms]

Pic 3
Posted via Mobile Device

[Matts Kustoms]

Pic 4
Posted via Mobile Device

[aftamathe86]

How's the rearview mirror in last pic in line pending response thanks
Posted via Mobile Device

[Matts Kustoms]

Originally Posted by aftamathe86

How's the rearview mirror in last pic in line pending response thanks
Posted via Mobile Device

Here is a better picture. It's got some shading behind the glass but still can see pretty clearly and free movement. Looks like it would be $25 shipped to you. Let me know.
Posted via Mobile Device

[aftamathe86]

Originally Posted by Matts Kustoms

Here is a better picture. It's got some shading behind the glass but still can see pretty clearly and free movement. Looks like it would be $25 shipped to you. Let me know.
Posted via Mobile Device

Thanks for the extra picture but mine is in the same condition
Posted via Mobile Device

[faribran]

Do you know the trivia story on the letters on the doors??
Posted via Mobile Device

[Matts Kustoms]

Originally Posted by faribran

Do you know the trivia story on the letters on the doors??
Posted via Mobile Device

Honestly I have know idea and have wondered since I bought the truck. Those were the original doors to the truck cab shown and the guy I bought it from used the engine and trans for an ice cream truck haha.
Posted via Mobile Device

[DaHos]

Are all the body lines of the panels straight, any bumper damage to the rear tails, header panel, top rails straight (looks to have a dinger on the ds rear in pic?) inside tail light cup etc. You said minor holes, is that in reference to the drilled holes or other rust areas? Floor wavey or flat. etc...

If its easier to email pics, PM me for addy.

Please LMK, could poss pick up this week, thx, D'

[Matts Kustoms]

Originally Posted by DaHos

Are all the body lines of the panels straight, any bumper damage to the rear tails, header panel, top rails straight (looks to have a dinger on the ds rear in pic?) inside tail light cup etc. You said minor holes, is that in reference to the drilled holes or other rust areas? Floor wavey or flat. etc...

If its easier to email pics, PM me for addy.

Please LMK, could poss pick up this week, thx, D'

PM sent.
Posted via Mobile Device

[powell72]

Originally Posted by Matts Kustoms

Honestly I have know idea and have wondered since I bought the truck. Those were the original doors to the truck cab shown and the guy I bought it from used the engine and trans for an ice cream truck haha.
Posted via Mobile Device

Elvis' motto, "Taking Care of Business", that and the lightning bolt were on a lot of things he owned. Didn't mean to hijack your thread, free bump!

[DaHos]

More details and pics on the bed please.....

[Matts Kustoms]

Originally Posted by DaHos

More details and pics on the bed please.....

Southern bed I drove to Kentucky for, really nice shape pretty solid floor. Bed has a bow to it and I picked up the missing tailgate cups and linkages from a member. Here is another picture let me know what you would like to see and I will send you a pm. Worst spot of rust is in the picture.
Posted via Mobile Device

[Matts Kustoms]

Originally Posted by DaHos

More details and pics on the bed please.....

Here is one of the bed floor and you can see the fender wells. The guy I bought from sandblasted and primed the wells and primed the inside of the tailgate. It has the factory holes for trim and bed rail caps.
Posted via Mobile Device

[faribran]

Yes, taking care of business in a flash ! Cool to see this on one of our trucks
Posted via Mobile Device

[DaHos]

Im in for the bed and fenders, PM sent, THX !

[Matts Kustoms]

Bed sold to Dahos.

Side note I will traveling to West Virginia this weekend (Huntington specifically) and will be traveling through Ohio. If anyone is interested in something I have available I would be willing to throw it in the bed of my truck and meet up along the way.

Humpday bump.

[gofastnut]

Still have the hood hinges?

[19Chevy67C10]

I will take the door hinges just pm me price including shipping to 77578.

Thanks,

Kev.

[jervin]

Hello, do you still have the fenders for sale? thanks

[Matts Kustoms]

Hey guys sorry for the delay work has been crazy busy.

@ gofastnut: The hood hinges are still available, let me know a zip and I can PM you price with shipping

@ 19Chevy67C10: I will get a PM to you later today with price on door hinges

@ jervin: I still have the fenders available, let me know if you would like any other pictures of them

Thanks,
Sam

[gofastnut]

95932
Thanks