NE WTB 1967 4x4 Front brake drum

[jmader]

Looking for a front brake drum for a 67 GMC K15 on a closed knuckle Dana 44 front axle with the adjuster slot on the front side as pictured below.

[jmader]

ttt

[jmader]

ttt

[jmader]

ttt

[old Chevy guy]

I have a pair of new drums in the box's that were for a 69 k10 I have. not a closed knuckle front axle but the drums may be the same anyway. Tell me what the dimensions are and I'll see if they match or I can send you the part number. I have the 2 back ones and all the shoes and new hardware and possibly the cylinders too if your interested in a package deal. If I fix mine I have closed knuckle 3/4 ton front and matching eaton rear I'm gonna use so the brake stuff won't work for me.

[jmader]

The inside diameter is 11" and the depth is just shy of 2 1/2". There is a part number 81004 on the outer edge and 10426-E towards the middle. Also on the outer edge it says MAX DIA 11.060. Does this help?

[old Chevy guy]

I have fronts and backs both measure the same 11 x 2 1/2 the part numbers on the boxes are Wagner BD60002 and BD 60130. I also have the old ones that are on the truck that these were going to replace. I have no idea of the condition without taking them off. I have the 4 drums and two sets of shoes and two wheel cylinders that I found so far. Im fairly sure I have at least two hardware kits also. As near as I can tell all k10's 67-70 use this drum,BD60130. Not to shoot myself in the foot but after googleing it I did find some new online too if you wanted to go that route. The wagner ones are mostly out of stock but I found some Centric brand one's on Finditparts.com Part # 122.66011

[jmader]

Could you post a picture of what you have? How much are you looking to get for them? Shipping might be a little rough.

[old Chevy guy]

I can tomorrow they are in a truck body in the yard and there isn't any lights . they have a bit of surface rust on the outside but look pretty much new and shiny on the inside, the boxes were still taped shut till today. The price depends on what you want. old, new, all, some. I would like to sell the new ones in pairs at least. The more that goes together the better the price and probably the shipping. I would sell the old ones separately I suppose. LMK what your thinking and I'll think on a price

[jmader]

I'll be looking at the front 2 for sure and probably all 4. My rears will need to be machined and it's probably smart to just change them all since I'm doing a complete restoration.