Steering column from 92 GMC 3500 to a 86K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rubble · 11-26-2013, 09:03 PM

Will a steering column from a 1992 GMC 3500 bolt into an 86K20? My 86 doesn't have tilt,this 92 does.Both are standard trans.

Sodell · 11-26-2013, 09:21 PM

I don't think it will, and the electronics are different.

Rubble · 11-26-2013, 09:36 PM

I thought about the wiring after posting it!! It was a long shot eh...thanx

**1774btcrew** · 11-27-2013, 01:09 AM

Quote:

Originally Posted by Rubble

I thought about the wiring after posting it!! It was a long shot eh...thanx

I think the electrical should be the same. I build a lot of columns and have used the turn signal switches out of the 92 body style trucks. I do know that where it mounts to the floor will be different. I think the 92 has the piece welded to the column where it mounts to the floor. It is possible to cut this off and use the gasket and plate from your 86 column. What would be most important would be to compare the lengths and then decide if it is worth your time to cut the floor plate off the 92 column.

Rubble · 11-27-2013, 01:37 AM

I will have a closer look at column once it gets parted out..

11-26-2013, 09:03 PM	#1
Rubble Registered User Join Date: Feb 2012 Location: Big Valley. Alberta Posts: 674	Steering column from 92 GMC 3500 to a 86K20 Will a steering column from a 1992 GMC 3500 bolt into an 86K20? My 86 doesn't have tilt,this 92 does.Both are standard trans. __________________ 1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution"

11-26-2013, 09:21 PM	#2
Sodell Registered User Join Date: Mar 2013 Location: Fayetteville Arkansas Posts: 830	Re: Steering column from 92 GMC 3500 to a 86K20 I don't think it will, and the electronics are different. __________________ Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652

11-26-2013, 09:36 PM	#3
Rubble Registered User Join Date: Feb 2012 Location: Big Valley. Alberta Posts: 674	Re: Steering column from 92 GMC 3500 to a 86K20 I thought about the wiring after posting it!! It was a long shot eh...thanx __________________ 1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution"

11-27-2013, 01:37 AM	#5
Rubble Registered User Join Date: Feb 2012 Location: Big Valley. Alberta Posts: 674	Re: Steering column from 92 GMC 3500 to a 86K20 I will have a closer look at column once it gets parted out.. __________________ 1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.