Auxiliary battery trays... any intrest? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**StingRay** · 07-16-2003, 12:59 AM

I can have auxiliary battery trays ( the drivers side one) reproduced to very high standards if sufficient intrest exists. I spent a large amount of time measuring, drawing ( in AutoCad) and running mock ups on cnc eqipment until all of the dimensions were identical to factory pieces. The side plates will accept a stock tray as an original does and they could be offered as unassembled/no tray, mostly assembled but less bottom tray or as completed assemblies with tray and even as powdercoated assemblies. If serious intrest exists I will consider having a small run (at least 10) reproduced as long as I can cover costs. I have no Idea what the final cost would be at this time as I have only done them in aluminum at this point for myself. For factory type steel units I would have to pay for 3rd party programming and production. I won't even think about doing it without some kind of quantity to go out for quote with. Post below if seriously interested.

Ray

palallin · 07-16-2003, 10:47 AM

I'm very interested, though I can't say "at any cost."

07-16-2003, 12:40 PM

same here

**StingRay** · 07-18-2003, 12:24 AM

That's two and I believe I have a third. Any body else?

RED72blazer · 07-18-2003, 01:18 AM

Me... me! I want one

Edmond · 07-18-2003, 07:08 AM

Yep. I'm interested
Not at any cost though.....

Cya,
Edmond

07-16-2003, 12:59 AM	#1
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Auxiliary battery trays... any intrest? I can have auxiliary battery trays ( the drivers side one) reproduced to very high standards if sufficient intrest exists. I spent a large amount of time measuring, drawing ( in AutoCad) and running mock ups on cnc eqipment until all of the dimensions were identical to factory pieces. The side plates will accept a stock tray as an original does and they could be offered as unassembled/no tray, mostly assembled but less bottom tray or as completed assemblies with tray and even as powdercoated assemblies. If serious intrest exists I will consider having a small run (at least 10) reproduced as long as I can cover costs. I have no Idea what the final cost would be at this time as I have only done them in aluminum at this point for myself. For factory type steel units I would have to pay for 3rd party programming and production. I won't even think about doing it without some kind of quantity to go out for quote with. Post below if seriously interested. Ray __________________ Saskatoon, Saskatchewan Canada

07-16-2003, 10:47 AM	#2
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,238	I'm very interested, though I can't say "at any cost." __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. Last edited by palallin; 07-16-2003 at 12:51 PM.

07-18-2003, 12:24 AM	#4
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	That's two and I believe I have a third. Any body else? __________________ Saskatoon, Saskatchewan Canada

07-18-2003, 01:18 AM	#5
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Me... me! I want one __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

07-18-2003, 07:08 AM	#6
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,063	Yep. I'm interested Not at any cost though..... Cya, Edmond __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- The Netherlands

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

07-16-2003, 12:40 PM	#3
Linus0014 Guest Posts: n/a	same here

Register or Log In To remove these advertisements.