![]() |
|
![]() |
#1 |
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
67 69
Would any happen to have pictures of a 67 core support and a 69 core support. I got a lot of details on my other thread about the differences, but I'd like to actually see the differences between the two so I can figure out how I could use a 69 core support for a mock up with 67 fenders.
Also, does anyone have a measurement of the distance between the inside of the fenders from end to end of the core support for a 67? That way I can make a cross bar and tack it to the fenders if I can't get my core to work. This might be an easier way to do it since I won't be running a core support. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Mar 2011
Location: bolivar, mo
Posts: 839
|
Re: 67 69
The differences between them shouldnt make a difference in mock up.
The only differences (that Ive found) are the headlight buckets and the 5 weld nuts along the bottom (on the 67) for the splash pan to attach. I used a 69-70 core, modified the buckets and added the weldnuts for my 68. I posted a thread in the projects/builds titled: using 70 core support in a 68
__________________
1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030 Last edited by 54belair; 12-20-2013 at 03:23 PM. Reason: add text |
![]() |
![]() |
![]() |
#3 |
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Re: 67 69
Thanks I'll defiantly check that out.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|