Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-21-2013, 01:20 PM | #1 |
Registered User
Join Date: Jun 2007
Location: Charlotte, NC
Posts: 516
|
1966 back lights wiring
I need to re-hook up my reverse lights on my truck. I need to find the wire to the backup lights on my 1966 C-10. Was it originally activated by a switch on the steering column under the dash (3 speed manual originally) or was it activated by a switch on the tranny somewhere. I'm hoping the wire is still under there hanging somewhere. Just need to know where to start looking. What color is the wire? Any help would be appreciated.
Any ideas for a slick hookup, my trans was changed to a turbo 400 by the PO. Might just do a toggle switch under the dash if no slicker ideas work out.
__________________
past trucks: 1980 C-10 Silverado SWB 1961 C-10 custom cab LWB 1966 C-10 custom cab LWB |
12-21-2013, 01:49 PM | #2 |
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 1966 back lights wiring
I think hooking it up as original would work out. The reverse switch for a 3 speed or auto is the same as a passenger car in those years. 4 speed is a different story!
The green wire should come into the cab with the tail light wires or if installed by the dealer just above it as a single wire.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|