Winter Grill Cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DreamRyder1963** · 12-31-2013, 12:18 PM

Does anyone make a winter grill cover for our trucks?

My truck is not reaching full operating temperature which seems to be causing the truck to run rich. I installed a new thermostat and checked the antifreeze/water ratio in the radiator but it still barely gets warm. I think at this point I need to get a winter grill cover or something similar to block some incoming air. I attached a pic similar to what I am thinking.

geezer#99 · 12-31-2013, 12:27 PM

Use a piece or pieces of cardboard. Leave a hole in the centre close to the centre of the fan. Easy to put in and remove if it warms up.

FRENCHBLUE72 · 12-31-2013, 01:07 PM

I use cardboard also just pull it out in the summer and replace for winter time..

**DreamRyder1963** · 12-31-2013, 01:52 PM

Ok. I am just a bit concerned about the cardboard getting soggy and damageing my radiator.

geezer#99 · 12-31-2013, 02:14 PM

Quote:

Originally Posted by DreamRyder1963

Ok. I am just a bit concerned about the cardboard getting soggy and damageing my radiator.

Won't happen. Use some thick stuff.
Don't cover just the bottom half either.
Cover it completely or leave a 6" diameter hole in the middle.

**DreamRyder1963** · 12-31-2013, 02:21 PM

Cool thanks for the replies.

12-31-2013, 12:18 PM	#1
DreamRyder1963 Senior Member Join Date: Jul 2012 Location: Knoxville, TN Posts: 499	Winter Grill Cover Does anyone make a winter grill cover for our trucks? My truck is not reaching full operating temperature which seems to be causing the truck to run rich. I installed a new thermostat and checked the antifreeze/water ratio in the radiator but it still barely gets warm. I think at this point I need to get a winter grill cover or something similar to block some incoming air. I attached a pic similar to what I am thinking. Attached Images __________________ 1971 Chevy C10 Cheyenne (sold for Mazda) 1963 Chevy Corvair Pro-Touring Project 2012 Mazda 3 i Sport sedan http://www.dracoautodesigns.com/

12-31-2013, 12:27 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,731	Re: Winter Grill Cover Use a piece or pieces of cardboard. Leave a hole in the centre close to the centre of the fan. Easy to put in and remove if it warms up.

12-31-2013, 01:07 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Winter Grill Cover I use cardboard also just pull it out in the summer and replace for winter time.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2013, 01:52 PM	#4
DreamRyder1963 Senior Member Join Date: Jul 2012 Location: Knoxville, TN Posts: 499	Re: Winter Grill Cover Ok. I am just a bit concerned about the cardboard getting soggy and damageing my radiator. __________________ 1971 Chevy C10 Cheyenne (sold for Mazda) 1963 Chevy Corvair Pro-Touring Project 2012 Mazda 3 i Sport sedan http://www.dracoautodesigns.com/

12-31-2013, 02:21 PM	#6
DreamRyder1963 Senior Member Join Date: Jul 2012 Location: Knoxville, TN Posts: 499	Re: Winter Grill Cover Cool thanks for the replies. __________________ 1971 Chevy C10 Cheyenne (sold for Mazda) 1963 Chevy Corvair Pro-Touring Project 2012 Mazda 3 i Sport sedan http://www.dracoautodesigns.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.