NC WTB driveshaft for 67 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Littletony · 01-04-2014, 08:24 PM

I am looking for a driveshaft for a 67 swb. My truck has the three speed manual trans with the pg spline output shaft.

68 SHORT-STEP'N · 01-05-2014, 07:32 PM

I have one on a 68 swb , 3 on the floor . Should be the same .

Littletony · 01-05-2014, 07:34 PM

Is there anyway you could measure it for me? Also how much do you want for it?

68 SHORT-STEP'N · 01-05-2014, 08:35 PM

Quote:

Originally Posted by Littletony

Is there anyway you could measure it for me? Also how much do you want for it?

I can do it tomorrow , raining & freezing here right now

mahanian · 01-05-2014, 08:12 PM

I have a 1 piece and 2 piece off SWB's, they were behind a TH400, not sure if they are the correct length for a PG. What length do you need?

Littletony · 01-05-2014, 08:30 PM

The manual trans in my truck is shorter then the 400. But it looks like I need a shaft around 63" or so from u joint to u joint.

Littletony · 01-05-2014, 08:43 PM

Thank you sir, when ever you have time.

68 SHORT-STEP'N · 01-06-2014, 05:16 PM

Mine is a 2 piece about 63"" long

Littletony · 01-06-2014, 08:26 PM

How much are you asking for it?

68 SHORT-STEP'N · 01-06-2014, 08:57 PM

I can do $100.00 + shipping

Littletony · 01-06-2014, 09:17 PM

How much do you think shipping will be? Can you post up some pictures of it?

68 SHORT-STEP'N · 01-06-2014, 10:39 PM

$25.00 for shipping . This is the only pic I have right now , I can get better ones tomorrow .

68 SHORT-STEP'N · 01-10-2014, 12:11 AM

Pics

Littletony · 01-11-2014, 02:41 AM

Short stepn I found one right down the road from me today. Thank you for the offer and I am sorry if I wasted any of your time sir.

01-04-2014, 08:24 PM	#1
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	WTB driveshaft for 67 C10 I am looking for a driveshaft for a 67 swb. My truck has the three speed manual trans with the pg spline output shaft. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-05-2014, 07:32 PM	#2
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 I have one on a 68 swb , 3 on the floor . Should be the same . __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-05-2014, 07:34 PM	#3
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 Is there anyway you could measure it for me? Also how much do you want for it? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-05-2014, 08:12 PM	#5
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: WTB driveshaft for 67 C10 I have a 1 piece and 2 piece off SWB's, they were behind a TH400, not sure if they are the correct length for a PG. What length do you need? __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

01-05-2014, 08:30 PM	#6
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 The manual trans in my truck is shorter then the 400. But it looks like I need a shaft around 63" or so from u joint to u joint. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-05-2014, 08:43 PM	#7
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 Thank you sir, when ever you have time. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-06-2014, 05:16 PM	#8
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 Mine is a 2 piece about 63"" long __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-06-2014, 08:26 PM	#9
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 How much are you asking for it? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-06-2014, 08:57 PM	#10
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 I can do $100.00 + shipping __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-06-2014, 09:17 PM	#11
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 How much do you think shipping will be? Can you post up some pictures of it? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

01-06-2014, 10:39 PM	#12
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 $25.00 for shipping . This is the only pic I have right now , I can get better ones tomorrow . Attached Images __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-10-2014, 12:11 AM	#13
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: WTB driveshaft for 67 C10 Pics Attached Images __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-11-2014, 02:41 AM	#14
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: WTB driveshaft for 67 C10 Short stepn I found one right down the road from me today. Thank you for the offer and I am sorry if I wasted any of your time sir. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.