|
02-10-2014, 06:23 PM | #1 |
Registered User
Join Date: Dec 2008
Location: spokane missouri
Posts: 8
|
rocket ignitor wheels
I was wanting to put a set of ignitor wheels on my 68.
I looked on rockets web site and found only one back space Offered on the 5 on 5 in a 7" width. The bs is 4.25. Will that be OK on the front of a 68 with 2.5 " drop spindles and 2" drop springs? |
02-15-2014, 05:30 PM | #2 |
Registered User
Join Date: Dec 2008
Location: spokane missouri
Posts: 8
|
Re: rocket ignitor wheels
Ordered the wheels, hope they fit OK .
A little unsure of the 4.25" backspace on The front, but I think they will be fine. Thanks For all the input from the "experts" on the site. |
02-15-2014, 05:56 PM | #3 |
Registered User
Join Date: Sep 2008
Location: CASA GRANDE AZ
Posts: 4,276
|
Re: rocket ignitor wheels
That bs on a 7in rim will be fine on the front. Did you get a wider rear wheel?
__________________
70 SWB STEPSIDE 70 BLAZER 09 challenger |
02-16-2014, 10:39 PM | #4 |
Registered User
Join Date: Dec 2008
Location: spokane missouri
Posts: 8
|
Re: rocket ignitor wheels
Yes. I got the 15x8 with 3 3/4" bus.
|
02-20-2014, 02:39 PM | #5 |
Registered User
Join Date: Dec 2008
Location: spokane missouri
Posts: 8
|
Re: rocket ignitor wheels
Well I got the wheels today, and 4.25 " of bs is too much bs.
Looks like 3.75 is max bs that will clear the arm on the spindles. I/2" spacer will make them work but a pain in the butt. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|