Canada Nos signal cancel

[Robert Paul Thomas]

100 to the first taker

[Robert Paul Thomas]

I believe tilt

[w314speed]

I'll take after verification of part# and proper application for tilt? Thanks, Dan

[Robert Paul Thomas]

Part number 1995900

[Already Gone]

If W314Speed passes and it will work on a tilt column I'll take it. I'm at the tailend of a nightshift and wil be going to bed soon so will check this thread when I get up this aftenoon.

[w314speed]

I'll pass on to Already Gone. Thanks for the opportunity to get into your NOS Stuff. Dan

[Already Gone]

Originally Posted by w314speed

I'll pass on to Already Gone. Thanks for the opportunity to get into your NOS Stuff. Dan

Thanks for the opportunity Dan.

Okay so I guess its mine and I have couple questions. Did they happen to put the screws that hold the mechanism in place in the box ? I ask because I have nothing in my column now and I would think those screws are very specific to the column to hold the canceller in place Were you including shipping in your price and will you take Canadian money. I pay with PayPal if that is okay.

[68shortfleet]

Originally Posted by Already Gone

Thanks for the opportunity Dan.

Okay so I guess its mine and I have couple questions. Did they happen to put the screws that hold the mechanism in place in the box ? I ask because I have nothing in my column now and I would think those screws are very specific to the column to hold the canceller in place Were you including shipping in your price and will you take Canadian money. I pay with PayPal if that is okay.

If the mounting screws are the same as a non-tilt column, I have some if your interested. The column is in my scrap metal pile if you want the screws.

Just cover shipping.

[Already Gone]

Originally Posted by 68shortfleet

If the mounting screws are the same as a non-tilt column, I have some if your interested. The column is in my scrap metal pile if you want the screws.

Just cover shipping.

Thank you. I'll PM you my shipping info and just let me know what you need.

[bcnya2]

Do you have to rewire the hole column? I sure that is whats wrong with mine, but not sure I need the wiring? Can this part be purchased separate?

Put me in line if your deal falls through.

thanks,
Greg

[Classic Bowties]

Originally Posted by Robert Paul Thomas

I believe tilt

Originally Posted by 68shortfleet

If the mounting screws are the same as a non-tilt column, I have some if your interested.

Hello everybody, it's been a fairly good amount of time since I checked in around here and was just directed by another member via e-mail to this thread with some questions. This pictured 5900 turn signal switch was not an O.E. application for the A.T. column shifted tilt columns, there are a hand full of gm/delco p/n's that can be used on the A.T. tilts if you already have an existing shift indicator lamp socket and power wire to swap over to the new non-tilt switch. The real deal A.T. tilt only turn signal switches are fairly hard to find in GM/Delco NOS anymore, I have added some pictures of two different Delco t/s switches below, one for the non-tilts and the other style for the A.T. tilts showing the automatic trans shift indicator lamp socket and grey power wire. I have come accross a few early NOS turn signal switch p/n's that did not have a provision for mounting the A.T. tilt only indicator bulb socket, on this early type of switch the turn signal function, hazard function and horn function part of the switch would all work, the negative side to this would be that you now have a non-illuminated shift indicator lens. While getting the turn signal switch Id pictures and also since the discussion came up above, I decided to get some pics showing the difference in the tilt and non-tilt turn signal switch mounting screws as I have seen the subject come up quite a few times over the years. Hope the pictures help with some of your questions and good evening to all, Mel.

[yote1234]

great info !!!!!!!

[Already Gone]

Originally Posted by Classic Bowties

Hello everybody, it's been a fairly good amount of time since I checked in around here and was just directed by another member via e-mail to this thread with some questions. This pictured 5900 turn signal switch was not an O.E. application for the A.T. column shifted tilt columns, there are a hand full of gm/delco p/n's that can be used on the A.T. tilts if you already have an existing shift indicator lamp socket and power wire to swap over to the new non-tilt switch. The real deal A.T. tilt only turn signal switches are fairly hard to find in GM/Delco NOS anymore, I have added some pictures of two different Delco t/s switches below, one for the non-tilts and the other style for the A.T. tilts showing the automatic trans shift indicator lamp socket and grey power wire. I have come accross a few early NOS turn signal switch p/n's that did not have a provision for mounting the A.T. tilt only indicator bulb socket, on this early type of switch the turn signal function, hazard function and horn function part of the switch would all work, the negative side to this would be that you now have a non-illuminated shift indicator lens. While getting the turn signal switch Id pictures and also since the discussion came up above, I decided to get some pics showing the difference in the tilt and non-tilt turn signal switch mounting screws as I have seen the subject come up quite a few times over the years. Hope the pictures help with some of your questions and good evening to all, Mel.

Thanks for the info Mel. So are you saying the one for sale on here might not work on a72 with tilt?

[Robert Paul Thomas]

Just went and checked, no screws unfortunately, and yes I do PayPal, 25 should cover priority post if that's ok, that way you get a tracking number

[Robert Paul Thomas]

Send me your mailing address , and I'll get it out right away thx

[Already Gone]

Originally Posted by Robert Paul Thomas

Send me your mailing address , and I'll get it out right away thx

PM sent

[Robert Paul Thomas]

Money received and parts gone. If this doesn't work for you, I'll gladly refund your money. Please let me know through a pm though. Thanks Rob

[Robert Paul Thomas]

I also have another and I will check it, take a picture and forward to you