1956 Chevy truck build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryan56chevy · 02-28-2014, 10:40 AM

Hey guys!! My name is Ryan from La Vernia TX. I obtained a 56 chevy stepside that I figured was a good second project. I've been working on it a few month, so I will throw some pictures up. Let me know what you think. I am always looking for suggestions and pointers. It started with a 305 and 3 speed transmission, but I pulled it out and put a SBC 400 that was destroked down to a 377 with a 700r4 trans. Should "get it" pretty good.

ryan56chevy · 02-28-2014, 10:42 AM

Here are some more pics.

ryan56chevy · 02-28-2014, 10:45 AM

...and some more pics. I really wanted a big back window, but I couldn't find the truck around here, so I went to my local junk yard and fab'd one in. Took about a month. I won't be doing THAT again. Haha

ryan56chevy · 02-28-2014, 10:48 AM

Here are some more! This pic is the frame with the 305 before I really got started. Pulled EVERYTHING off and started from scratch. New bushing and ball joints, 2" drop spindles which I probably didn't need because it already sits low enough after building my airbag brackets.

ryan56chevy · 02-28-2014, 10:52 AM

Here is a top view of the frame. I have come to find out that I really don't like installing shocks. Travel and location are always a pain!

Flames97 · 02-28-2014, 11:03 AM

That looks good, coming along nicely.

Kim57 · 02-28-2014, 11:17 AM

Welcome.
Looks like a real sweet truck.
Kim

ryan56chevy · 03-03-2014, 09:37 AM

Thanks! I don't think its too bad for my second build. I finally got my patch panel finished on the front corner and started to put it all back together yesterday. I have a little work to do on the bed, but I have to go to town for supplies. Putting those doors on is definitely not a one man job. Hahaha. I still have some adjusting to do.

**youngrodder** · 03-03-2014, 10:03 AM

Looks good Ryan. I like what you have going on...

Marc

Kim57 · 03-03-2014, 11:06 AM

Sits nice and low.
Kim

Spblack · 03-03-2014, 06:29 PM

welcome ryan... cant wait to see it finished. what color you going with?

ryan56chevy · 03-04-2014, 02:48 PM

Going to go with gloss black. I was going to do the interior a blood red, but I think I am going to go with a baseball glove tan/brown color.

**Dan in Pasadena** · 03-13-2014, 12:51 PM

Quote:

Originally Posted by ryan56chevy

Going to go with gloss black. I was going to do the interior a blood red, but I think I am going to go with a baseball glove tan/brown color.

I think it was the early Audi TT's that had actualy baseball glove heavy stitching on their bucket seats. You might try doing an interwebs search for photos. I'm a dyed-in-the-wool Dodgers fan and I have considered doing that on my bench seat. Not sure how good/bad it'd look on a bench though.

**Dan in Pasadena** · 03-13-2014, 12:54 PM

Here 'ya go. I like it, others may think it's too heavy handed. I'm CERTAIN it'd be costly as hell though!

ryan56chevy · 03-13-2014, 09:52 AM

LOOKING FOR A GOOD PAINT/BODY SHOP IN THE AREA OF SAN ANTONIO. ANY IDEAS???? I got a quote from a guy, and it made me want to make this a rat rod.....

Spblack · 03-13-2014, 12:43 PM

not in san Antonio. im down in Houston, I know a couple. you got a big shop, paint it yourself. lol. you have any close ups of your motor mounts? im installing a 5.3 in mine now and man..let me tell you..its a pain

Rednek13x · 03-13-2014, 05:17 PM

^^^^ i love that!

**Dan in Pasadena** · 03-13-2014, 08:57 PM

Quote:

Originally Posted by Rednek13x

^^^^ i love that!

Yeah, I really like the look too, but I wonder if it would hold up over time and could I even find someone who would do it remotely affordably.

Looks cool though. I could see this in a Delmo truck - MINE! - if I ever win the Lotto and can afford to hire him, lol

ChuckDriver · 03-13-2014, 09:53 PM

Very cool project, love how low it sits!!

Spblack · 03-13-2014, 08:16 PM

ryan, what gas tank did you go with? how did you configure your motor and trans alignment?

71'tahoe · 03-13-2014, 11:01 PM

Great build! Im digging the low stance!

ryan56chevy · 03-14-2014, 09:54 AM

It actually sits too low in the front. I need to bring it up an inch so it won't hit a rock or something else that will crack the trans or paint. The motor fit with small block mounts since it was a Nova front. I had to fab my own transmission cross-member so that it would go over my brake booster. It was already mounted and didn't want to jack with it. I put an angle finder on the carb to find out how low I needed to go with my bends.

Kim57 · 03-14-2014, 09:59 AM

Nice job.
Kim

Rednek13x · 03-14-2014, 10:55 AM

What front clip are you running? Looks good so far i like how low you got it!

ryan56chevy · 03-14-2014, 12:33 PM

It is a chevy nova clip I believe. We changed out all the bushings, ball joints, brake pads, and steering. Frontend is good to go.

02-28-2014, 10:40 AM	#1
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	1956 Chevy truck build Hey guys!! My name is Ryan from La Vernia TX. I obtained a 56 chevy stepside that I figured was a good second project. I've been working on it a few month, so I will throw some pictures up. Let me know what you think. I am always looking for suggestions and pointers. It started with a 305 and 3 speed transmission, but I pulled it out and put a SBC 400 that was destroked down to a 377 with a 700r4 trans. Should "get it" pretty good. Attached Images

02-28-2014, 10:42 AM	#2
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	1956 Chevy truck build Here are some more pics. Attached Images

02-28-2014, 10:45 AM	#3
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	1956 Chevy truck build ...and some more pics. I really wanted a big back window, but I couldn't find the truck around here, so I went to my local junk yard and fab'd one in. Took about a month. I won't be doing THAT again. Haha Attached Images

02-28-2014, 10:48 AM	#4
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	1956 Chevy truck build Here are some more! This pic is the frame with the 305 before I really got started. Pulled EVERYTHING off and started from scratch. New bushing and ball joints, 2" drop spindles which I probably didn't need because it already sits low enough after building my airbag brackets. Attached Images

02-28-2014, 10:52 AM	#5
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	Re: 1956 Chevy truck build Here is a top view of the frame. I have come to find out that I really don't like installing shocks. Travel and location are always a pain! Attached Images

02-28-2014, 11:03 AM	#6
Flames97 Registered User Join Date: Jan 2010 Location: Tonasket, Washington Posts: 316	Re: 1956 Chevy truck build That looks good, coming along nicely. __________________ -Aaron '15.5 Chevy Duramax LTZ/Z71, LML, CC/SB '77 Chevy K10, 4" lift, 33-12.50, 350/350 '55 Chevy Short Box (In Pieces)MII,4-link,Bagged,383 Stroker,700r4,3.73posi (SOLD) My 55.2 Chevy 3100 Build

02-28-2014, 11:17 AM	#7
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1956 Chevy truck build Welcome. Looks like a real sweet truck. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

03-03-2014, 09:37 AM	#8
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	Re: 1956 Chevy truck build Thanks! I don't think its too bad for my second build. I finally got my patch panel finished on the front corner and started to put it all back together yesterday. I have a little work to do on the bed, but I have to go to town for supplies. Putting those doors on is definitely not a one man job. Hahaha. I still have some adjusting to do. Attached Images

03-03-2014, 10:03 AM	#9
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: 1956 Chevy truck build Looks good Ryan. I like what you have going on... Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

03-03-2014, 11:06 AM	#10
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1956 Chevy truck build Sits nice and low. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

03-03-2014, 06:29 PM	#11
Spblack Registered User Join Date: Oct 2013 Location: spring Posts: 287	Re: 1956 Chevy truck build welcome ryan... cant wait to see it finished. what color you going with? __________________ 1959 Chevy Apache (sold) 1958 Fleetside Current My builds: http://67-72chevytrucks.com/vboard/s...d.php?t=606412 http://67-72chevytrucks.com/vboard/s...=1#post7560906

03-04-2014, 02:48 PM	#12
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	Re: 1956 Chevy truck build Going to go with gloss black. I was going to do the interior a blood red, but I think I am going to go with a baseball glove tan/brown color.

03-13-2014, 12:54 PM	#14
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,341	Re: 1956 Chevy truck build Here 'ya go. I like it, others may think it's too heavy handed. I'm CERTAIN it'd be costly as hell though! Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

03-13-2014, 09:52 AM	#15
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	Re: 1956 Chevy truck build LOOKING FOR A GOOD PAINT/BODY SHOP IN THE AREA OF SAN ANTONIO. ANY IDEAS???? I got a quote from a guy, and it made me want to make this a rat rod.....

03-13-2014, 12:43 PM	#16
Spblack Registered User Join Date: Oct 2013 Location: spring Posts: 287	Re: 1956 Chevy truck build not in san Antonio. im down in Houston, I know a couple. you got a big shop, paint it yourself. lol. you have any close ups of your motor mounts? im installing a 5.3 in mine now and man..let me tell you..its a pain __________________ 1959 Chevy Apache (sold) 1958 Fleetside Current My builds: http://67-72chevytrucks.com/vboard/s...d.php?t=606412 http://67-72chevytrucks.com/vboard/s...=1#post7560906



Register or Log In To remove these advertisements.

03-13-2014, 05:17 PM	#17
Rednek13x Registered User Join Date: Feb 2011 Location: Clear Lake, MN Posts: 329	Re: 1956 Chevy truck build ^^^^ i love that! __________________ 1957 Chevy Longbed Bagged V8 Project HACK CITY CUSTOMS

03-13-2014, 09:53 PM	#19
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: 1956 Chevy truck build Very cool project, love how low it sits!! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

03-13-2014, 08:16 PM	#20
Spblack Registered User Join Date: Oct 2013 Location: spring Posts: 287	Re: 1956 Chevy truck build ryan, what gas tank did you go with? how did you configure your motor and trans alignment? __________________ 1959 Chevy Apache (sold) 1958 Fleetside Current My builds: http://67-72chevytrucks.com/vboard/s...d.php?t=606412 http://67-72chevytrucks.com/vboard/s...=1#post7560906

03-13-2014, 11:01 PM	#21
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: 1956 Chevy truck build Great build! Im digging the low stance!

03-14-2014, 09:54 AM	#22
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	Re: 1956 Chevy truck build It actually sits too low in the front. I need to bring it up an inch so it won't hit a rock or something else that will crack the trans or paint. The motor fit with small block mounts since it was a Nova front. I had to fab my own transmission cross-member so that it would go over my brake booster. It was already mounted and didn't want to jack with it. I put an angle finder on the carb to find out how low I needed to go with my bends. Attached Images

03-14-2014, 09:59 AM	#23
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1956 Chevy truck build Nice job. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

03-14-2014, 10:55 AM	#24
Rednek13x Registered User Join Date: Feb 2011 Location: Clear Lake, MN Posts: 329	Re: 1956 Chevy truck build What front clip are you running? Looks good so far i like how low you got it! __________________ 1957 Chevy Longbed Bagged V8 Project HACK CITY CUSTOMS

03-14-2014, 12:33 PM	#25
ryan56chevy Registered User Join Date: Jul 2013 Location: La Vernia, TX Posts: 20	Re: 1956 Chevy truck build It is a chevy nova clip I believe. We changed out all the bushings, ball joints, brake pads, and steering. Frontend is good to go.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.