The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-22-2014, 01:09 PM   #1
silentt
Registered User
 
Join Date: Oct 2013
Location: Sterling, VA
Posts: 12
Need help replacing window regulator

I'm trying to replace the drivers side window regulator now in my 1971 c10. I've read a bunch of threads but all of them instructed to lower the window first to start. My window is stuck all the way up. What would be the best way to go forward? My door panel is off ready to go

Any help would be appreciated. I hate not having a driver window that rolls down
silentt is offline   Reply With Quote
Old 03-22-2014, 01:18 PM   #2
Molberg
Registered User
 
Molberg's Avatar
 
Join Date: Dec 2012
Location: Manitoba
Posts: 644
Re: Need help replacing window regulator

The track at lower edge of glass has notches where the nylon wheels of regulator have to pop out. Try pulling down on cross arms and cranking handle at same time to wiggle it down to required height
__________________
-Project Nitemare-

http://67-72chevytrucks.com/vboard/s...d.php?t=607359
Molberg is offline   Reply With Quote
Old 03-22-2014, 01:19 PM   #3
Molberg
Registered User
 
Molberg's Avatar
 
Join Date: Dec 2012
Location: Manitoba
Posts: 644
Re: Need help replacing window regulator

Cross arms of regulator I mean
__________________
-Project Nitemare-

http://67-72chevytrucks.com/vboard/s...d.php?t=607359
Molberg is offline   Reply With Quote
Old 03-22-2014, 01:41 PM   #4
silentt
Registered User
 
Join Date: Oct 2013
Location: Sterling, VA
Posts: 12
Re: Need help replacing window regulator

This window is jammed shut like the previous owner never wanted it to open.

The part that the window handle pops on to just spins freely without engaging the teeth. I can't get anything to budge, the window has no play at all.
silentt is offline   Reply With Quote
Old 03-23-2014, 09:10 AM   #5
Daddy Brim
Senior Member
 
Daddy Brim's Avatar
 
Join Date: Feb 2011
Location: Clovis Ca.
Posts: 632
Re: Need help replacing window regulator

Quote:
Originally Posted by silentt View Post
This window is jammed shut like the previous owner never wanted it to open.

The part that the window handle pops on to just spins freely without engaging the teeth. I can't get anything to budge, the window has no play at all.
Put a vice grip were the handle goes, use generous amounts of your favorite penetrating oil. Look and see if you can find were it is binding. Turn regulator and pull down on glass.
__________________
I'm sorry I called you stupid. I thought you knew already.

67 C-20 Custom Camper
68 Nova 396 it does wheelies
2005 Buick Century the one the wife drives
1989 Toyota Tercel to drive when I can't put gas in the first 2.
Daddy Brim is offline   Reply With Quote
Old 03-22-2014, 01:44 PM   #6
Molberg
Registered User
 
Molberg's Avatar
 
Join Date: Dec 2012
Location: Manitoba
Posts: 644
Re: Need help replacing window regulator

You could cut the cross arms of the regulator and remove a piece at a time. It's garbage anyways
__________________
-Project Nitemare-

http://67-72chevytrucks.com/vboard/s...d.php?t=607359
Molberg is offline   Reply With Quote
Old 03-23-2014, 11:56 AM   #7
kcsa75
Registered User
 
kcsa75's Avatar
 
Join Date: Oct 2010
Location: Kansas City
Posts: 3,590
Re: Need help replacing window regulator

Quote:
Originally Posted by Molberg View Post
You could cut the cross arms of the regulator and remove a piece at a time. It's garbage anyways


If the handle just spins you're going to have to replace regulator.
__________________
Willie
Swamp Angel Truckers
'72 C10 Highlander


People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.
kcsa75 is offline   Reply With Quote
Old 03-23-2014, 03:52 PM   #8
WIDESIDE72
Senior Member
 
WIDESIDE72's Avatar
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
Re: Need help replacing window regulator

On a stuck window I believe you can take all the screws out that hold the regulator to the door till it all comes loose. Then you can figure out what has got it stuck.
WIDESIDE72 is offline   Reply With Quote
Old 03-26-2014, 07:16 PM   #9
silentt
Registered User
 
Join Date: Oct 2013
Location: Sterling, VA
Posts: 12
Re: Need help replacing window regulator

I'll try more Saturday on my day off. All the screws for the regulator are already out. I tried the vice grips where the window knob goes but this regulator is screwed. I'm going to spray everything with penetrating oil and hopefully not break the window in frustration.
silentt is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com