![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
![]()
Hoping someone on this side of the board can help me. I have a 700r4/241C combo in my 90 sierra. Can i replace the 700 with a turbo 350 and keep the 241c? I searched but found no responses. Thanks in advance.
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2003
Location: Springfield,Mo.
Posts: 305
|
Re: 700r4 to TH350 swap and keep NP241C?
I used to buy a kit at a local transmission shop that included a new output shaft and a cast aluminum spacer that allowed a th350 to go in the place of a 700r4,Im sure they still exist.I personally would just have a good 700r built,a lot of good parts are around today that weren't 15 years ago,you can get a tough one built for little if any more than it costs to build a 350 and buy the swap kit.
__________________
RIP Baby Jack 2-06-07 See You On The Other Side My Little Man |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: 700r4 to TH350 swap and keep NP241C?
Thanks for the response bloertcher. I ask because my 350 is built a wee bit and honestly i only drive it once a month to get hay. Way i look at it it would never be cost effective enough to build the 700 since i rarely drive it. I think i'll google this swap and try n find that adapter.
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2003
Location: Springfield,Mo.
Posts: 305
|
Re: 700r4 to TH350 swap and keep NP241C?
I always bought mine at Ace transmission in springfield,mo.Like i said,the tailshaft in your trans has to be swapped out,but after that its a bolt up deal.
__________________
RIP Baby Jack 2-06-07 See You On The Other Side My Little Man |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: 700r4 to TH350 swap and keep NP241C?
Doesn't sound too bad then. I found a kit that has the shaft, rear 4 bolt housing adapter and a few odds n ends for 200 shipped.
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2003
Location: Springfield,Mo.
Posts: 305
|
Re: 700r4 to TH350 swap and keep NP241C?
That sounds like the one I've always used.
__________________
RIP Baby Jack 2-06-07 See You On The Other Side My Little Man |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
350 swap, 700 swap, keep 241c |
Thread Tools | |
Display Modes | |
|
|