MN Parting 67 GMC C1500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 05-22-2014, 08:01 PM

Parting whats left of this truck before I haul it off for scrap soon. Buddies sold awhile ago. I'm keeping the bumper and nice bed for my 67 GMC project. AC control and vents gone.

Some prices:
Grille: has chrome issues where black was painted, (maybe you could sand down and paint these spots. Probably the straightest you will ever find on a 67 GMC though. $125+ shipping- SOLD
Rock guard- $25 plus shipping SOLD
Steering wheel $40 shipped CONUS SOLD
Very nice 67 hood with zero holes- $150 picked up
Glovebox door- $35 shipped CONUS
big back window 67 AC Cab- $100 picked up (has rust on firewall one spot and needs rockers and corners, one spot on driprail). SOLD
Horn Cap gone
Bezels, radio, front bumper SOLD

**TBONE1964** · 05-22-2014, 08:14 PM

Any cluster? price and photos?

Thank you,
Tom

**Gary 70 Jimmy** · 05-22-2014, 08:15 PM

Do you have any of the emblems from the fenders and doors. Does it have red seat belts.

Vintage Windmills · 05-22-2014, 08:24 PM

Guys, to be clear, front half of truck is going to scrapyard as early as Saturday AM so don't hesitate. I will keep the hood and doors if not sold. I am making a trailer out of rear half since it has leafs. Make offers on anything and if you are local I wont refuse any offer if you pick the items up.

Also, on the grille, they were originally painted black around the headlight bezel perimeter. This is the only area with chrome issues.

Tbone, $39 shipped conus on gauge cluster. Modified with aftermarket gauges.

**Cash3481** · 05-22-2014, 08:29 PM

Evening Jud,
Fan shroud and horn button price shipped to 67110
Edit, Horn button is gone....we posted at the same time! Lol
Mike

Vintage Windmills · 05-22-2014, 11:22 PM

Quote:

Originally Posted by Cash3481

Evening Jud,
Fan shroud and horn button price shipped to 67110
Edit, Horn button is gone....we posted at the same time! Lol
Mike

Hi Mike, its a v6 fan shroud I'm pretty sure. P/N is in the one photo. Nice except for worn through area on one side.

$49 shipped or if its cool with Randy and you, I could leave at his place for $25

Mr.chivo · 05-22-2014, 11:31 PM

I will take the steering wheel, also gas and brake pedals with trim pending price, second on headlight bezels.

Vintage Windmills · 05-22-2014, 11:35 PM

Quote:

Originally Posted by Mr.chivo

I will take the steering wheel, also gas and brake pedals with trim pending price, second on headlight bezels.

Let me check out the pedals tomorrow, sounds good on the wheel and we'll see what the other gentleman decides on the bezels.

Jud

**Cash3481** · 05-23-2014, 10:08 AM

Quote:

Originally Posted by Vintage Windmills

Hi Mike, its a v6 fan shroud I'm pretty sure. P/N is in the one photo. Nice except for worn through area on one side.

$49 shipped or if its cool with Randy and you, I could leave at his place for $25

Jud,
Ill pass on the fan shroud to apache67.
Thanks for the pics.
Mike

Vintage Windmills · 05-23-2014, 03:28 PM

All, here we go, let me know if I missed anyone's questions.

Quote:

Originally Posted by Mr.chivo

Jud, does the glovebox have the "GMC" plastic emblem on it? How much for the door panel chrome ratainers? Any 67-69 door arm and mirrors?

The plastic tab/stud on the back is broken on the emblem. Door panel retainers $30 plus shipping. I'll get some pics of mirror setups, assuming you just want the single stem style (not the big camper or w/c mirrors)?

The bezels are yours if you want them, $70 shipped

Quote:

Originally Posted by luckyss

Also, I'll take the power steering setup if it's complete. I'll need everything

Let me figure out what size of box we'll need. I will see if you need the tie bar or if this clamps on... Shipping could be from $40 to $75 i'm guessing?

Quote:

Originally Posted by luckyss

Can I buy fuel filler and gas cap? I don't care about the rest I don't have anything now but a hole in the cab I'm trying to plug until I do bodywork.

I have one in from a 70 or 72 tank if that's ok? I think this tank is still good. No charge if you are getting the PS stuff, otherwise $23 shipped.

Quote:

Originally Posted by Gary 70 Jimmy

Is that all you have is the mail ends of the seat belts you want $48.00 shipped for both seat belts and emblems

There is more there, but its a mix of some other belts, I'll get a pic. Yes on price for all

Quote:

Originally Posted by gmc 2500 4x4

i will take the 3 lower after market gauges 14063

$29 shipped

Quote:

Originally Posted by Apache67

I pmd you last night on the radiator and fan shroud plus right front fender. Thanks

See pics above on shroud and below on rad, you're up on both.

Quote:

Originally Posted by chewychevy67

On the factory rug there should be a foot heal pad on the driver side sewn on. If the rug is trashed would you sell it seperate from it? Is it wore thru? Could you post pic's of it. Also is the 4 row rad auto or std tranny? Original harrison rad? Any damage? Rod.

I will check on heel pad. Original Harrison for auto tranny, no damage that indicates it will leak. Looks fairly good on the inside too. I'm not sure it doesn't need a pinhole or something fixed but PO was going to run it with the replacement 350 so decent chace its good or fixable. See pics below.

Quote:

Originally Posted by CATCHALLBLUE

Ill take it VW. and yes im in the the CONUS, SC to be exact.

Do we go through pp? I guess PM me with details. THANK YOU!

payment received, thanks.

Quote:

Originally Posted by jmader

Wow somehow I blew right across the grille pic. I'll take it shipped to 68803. Also looking for a good drivers side door relay.

If you would be willing to meet me around Omaha next weekend, you can save the shipping costs. Probably be around $50 to ship it there? What do you mean by driver relay? The mechanism inside the door that the inside handle attaches to?

Quote:

Originally Posted by muckmuck

I will pass the headlight bezels on to you.

Vintage.... Do you happen to know which carb it is?

Electric choke model, do you need numbers?

Quote:

Originally Posted by Cash3481

Jud,
Ill pass on the fan shroud to apache67.
Thanks for the pics.
Mike

No worries Mike.

Quote:

Originally Posted by 75gmc454

I can see the bracket for the buddy bucket console above the sending unit. My gmc may need that.
Also on the a/c lines. Everything that goes on the rear of the compressor is missing off of my truck.
Also does it have the parking brake handle cover?

Clint, I'll get some pics of the AC hoses and the bucket seat cab brace, and look at parking brake handle cover too.

Vintage Windmills · 05-22-2014, 08:28 PM

Horn cap sold previously, I'll get pics of emblems and belts.

muckmuck · 05-22-2014, 08:30 PM

Interested in carb, dash knobs and headlight bezels. Shipping is to 89044.

**TBONE1964** · 05-22-2014, 08:35 PM

I will pass on the cluster. The price is OK but I don't need any extra non gauge clusters at this time.

Thank you for your time and good luck with your sales.
Tom

duallyjams · 05-22-2014, 09:34 PM

arm rest ?

CATCHALLBLUE · 05-22-2014, 09:50 PM

how much for the power booster pushrod?

thanks!

75gmc454 · 05-22-2014, 09:54 PM

Hey Jud was that truck originally a v6 truck? If it was, I would be interested in the a/c hoses for my 67. --Clint

Vintage Windmills · 05-22-2014, 11:32 PM

Quote:

Originally Posted by duallyjams

arm rest ?

I think only the pass side is good. will have to look tomorrow

Quote:

Originally Posted by CATCHALLBLUE

how much for the power booster pushrod?

thanks!

$12 shipped assuming your CONUS, cant tell from your avatar.

Quote:

Originally Posted by TBONE1964

I will pass on the cluster. The price is OK but I don't need any extra non gauge clusters at this time.

Thank you for your time and good luck with your sales.
Tom

No worries, sounds good.

Quote:

Originally Posted by muckmuck

Interested in carb, dash knobs and headlight bezels. Shipping is to 89044.

Carb is $45, complete "brightwork" knob set $75, one year only bezels $70. THese prices are shipped per group but deduct 10 each for shipping if you take more more than one group.

Quote:

Originally Posted by 75gmc454

Hey Jud was that truck originally a v6 truck? If it was, I would be interested in the a/c hoses for my 67. --Clint

It had mounts and the fan shroud for v6 loose in the truck so I believe so Clint. What all are you needing?

Vintage Windmills · 05-22-2014, 11:17 PM

Pics for Gary,

Emblems have some pitting, $38 shipped for the pair. Seatbelts need cleaning and buckles have some rust, $29 shipped or $48 shipped with emblems

Vintage Windmills · 05-22-2014, 11:38 PM

more pics.

One year only uncut AC dash in this cab.

75gmc454 · 05-22-2014, 11:41 PM

I can see the bracket for the buddy bucket console above the sending unit. My gmc may need that.
Also on the a/c lines. Everything that goes on the rear of the compressor is missing off of my truck.
Also does it have the parking brake handle cover?

Vintage Windmills · 05-22-2014, 11:42 PM

Ram assist power steering! $85 plus shipping for the setup.

Also newer engine mounts/perches. Not sure what they are worth.

Mr.chivo · 05-23-2014, 12:00 AM

Jud, does the glovebox have the "GMC" plastic emblem on it? How much for the door panel chrome ratainers? Any 67-69 door arm and mirrors?

luckyss · 05-23-2014, 12:40 AM

Can I buy fuel filler and gas cap? I don't care about the rest I don't have anything now but a hole in the cab I'm trying to plug until I do bodywork.

luckyss · 05-23-2014, 01:05 AM

Also, I'll take the power steering setup if it's complete. I'll need everything

**Gary 70 Jimmy** · 05-23-2014, 03:29 AM

Is that all you have is the male ends of the seat belts you want $48.00 shipped for both seat belts and emblems

05-22-2014, 08:01 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Parting 67 GMC C1500 Parting whats left of this truck before I haul it off for scrap soon. Buddies sold awhile ago. I'm keeping the bumper and nice bed for my 67 GMC project. AC control and vents gone. Some prices: Grille: has chrome issues where black was painted, (maybe you could sand down and paint these spots. Probably the straightest you will ever find on a 67 GMC though. $125+ shipping- SOLD Rock guard- $25 plus shipping SOLD Steering wheel $40 shipped CONUS SOLD Very nice 67 hood with zero holes- $150 picked up Glovebox door- $35 shipped CONUS big back window 67 AC Cab- $100 picked up (has rust on firewall one spot and needs rockers and corners, one spot on driprail). SOLD Horn Cap gone Bezels, radio, front bumper SOLD Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 06-03-2014 at 12:52 AM.

05-22-2014, 08:14 PM	#2
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parting 67 GMC C1500 Any cluster? price and photos? Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

05-22-2014, 08:15 PM	#3
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting 67 GMC C1500 Do you have any of the emblems from the fenders and doors. Does it have red seat belts. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

05-22-2014, 08:24 PM	#4
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC C1500 Guys, to be clear, front half of truck is going to scrapyard as early as Saturday AM so don't hesitate. I will keep the hood and doors if not sold. I am making a trailer out of rear half since it has leafs. Make offers on anything and if you are local I wont refuse any offer if you pick the items up. Also, on the grille, they were originally painted black around the headlight bezel perimeter. This is the only area with chrome issues. Tbone, $39 shipped conus on gauge cluster. Modified with aftermarket gauges. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-22-2014, 08:29 PM	#5
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC C1500 Evening Jud, Fan shroud and horn button price shipped to 67110 Edit, Horn button is gone....we posted at the same time! Lol Mike

05-22-2014, 11:31 PM	#7
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting 67 GMC C1500 I will take the steering wheel, also gas and brake pedals with trim pending price, second on headlight bezels.

05-22-2014, 08:28 PM	#11
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC C1500 Horn cap sold previously, I'll get pics of emblems and belts. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-22-2014, 08:30 PM	#12
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: Parting 67 GMC C1500 Interested in carb, dash knobs and headlight bezels. Shipping is to 89044.

05-22-2014, 08:35 PM	#13
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parting 67 GMC C1500 I will pass on the cluster. The price is OK but I don't need any extra non gauge clusters at this time. Thank you for your time and good luck with your sales. Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

05-22-2014, 09:34 PM	#14
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Parting 67 GMC C1500 arm rest ? __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

05-22-2014, 09:50 PM	#15
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Re: Parting 67 GMC C1500 how much for the power booster pushrod? thanks!

05-22-2014, 09:54 PM	#16
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: Parting 67 GMC C1500 Hey Jud was that truck originally a v6 truck? If it was, I would be interested in the a/c hoses for my 67. --Clint

05-22-2014, 11:17 PM	#18
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC C1500 Pics for Gary, Emblems have some pitting, $38 shipped for the pair. Seatbelts need cleaning and buckles have some rust, $29 shipped or $48 shipped with emblems Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-22-2014, 11:38 PM	#19
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC C1500 more pics. One year only uncut AC dash in this cab. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-22-2014, 11:41 PM	#20
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: Parting 67 GMC C1500 I can see the bracket for the buddy bucket console above the sending unit. My gmc may need that. Also on the a/c lines. Everything that goes on the rear of the compressor is missing off of my truck. Also does it have the parking brake handle cover?



Register or Log In To remove these advertisements.

05-22-2014, 11:42 PM	#21
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC C1500 Ram assist power steering! $85 plus shipping for the setup. Also newer engine mounts/perches. Not sure what they are worth. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-23-2014, 12:00 AM	#22
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting 67 GMC C1500 Jud, does the glovebox have the "GMC" plastic emblem on it? How much for the door panel chrome ratainers? Any 67-69 door arm and mirrors?

05-23-2014, 12:40 AM	#23
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 67 GMC C1500 Can I buy fuel filler and gas cap? I don't care about the rest I don't have anything now but a hole in the cab I'm trying to plug until I do bodywork.

05-23-2014, 01:05 AM	#24
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 67 GMC C1500 Also, I'll take the power steering setup if it's complete. I'll need everything

05-23-2014, 03:29 AM	#25
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting 67 GMC C1500 Is that all you have is the male ends of the seat belts you want $48.00 shipped for both seat belts and emblems __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396 Last edited by Gary 70 Jimmy; 05-23-2014 at 04:34 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.