Blazer/Jimmy guys help needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ItsNotABlazer · 08-01-2003, 08:59 PM

I recently sold my leather seat out of the Jimmy and while putting the stock low back seats and console back in (supposedly the stock pieces from my 74 Blazer) I noticed that the holes for the console do not line up and even if they did line up I think the console is shaped wrong. I seem to recall someone posting a pic a while back of a 71 or so Blazer and the console looked very much like it. Does anyone have pics of the stock console and is it possible my 75 Jimmy could have come out without a console?

Thanks
Brad

Alexis · 08-02-2003, 03:34 AM

From what I know the differance between the two are one has cup holders 73+ the other 72 and below has a place for the buckle of the seat belts.

Grim Reaper · 08-02-2003, 09:03 AM

There is a 2-3 inch tall peice the console sits on on the back mount. That get's it level and lines up the holes.

bagged74 · 08-02-2003, 10:15 AM

the console should fit even if it is from an earlier model. there should be a bracket bolted to the floor an the back of the console to make the holes line up.

ItsNotABlazer · 08-02-2003, 12:50 PM

Ok mine has no bracket. And I would guess thats not an item thats available lol.

Brad

08-01-2003, 08:59 PM	#1
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Blazer/Jimmy guys help needed I recently sold my leather seat out of the Jimmy and while putting the stock low back seats and console back in (supposedly the stock pieces from my 74 Blazer) I noticed that the holes for the console do not line up and even if they did line up I think the console is shaped wrong. I seem to recall someone posting a pic a while back of a 71 or so Blazer and the console looked very much like it. Does anyone have pics of the stock console and is it possible my 75 Jimmy could have come out without a console? Thanks Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

08-02-2003, 09:03 AM	#3
Grim Reaper Registered User Join Date: Jul 2001 Location: Atlanta GA Posts: 1,704	There is a 2-3 inch tall peice the console sits on on the back mount. That get's it level and lines up the holes. __________________ Grim-Reaper 70 Pontiac LeMans Sport Convertible, worlds longest resto in progress Looking for 71-72 2wd Blazer or Jimmy Project

08-02-2003, 10:15 AM	#4
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	console? the console should fit even if it is from an earlier model. there should be a bracket bolted to the floor an the back of the console to make the holes line up.

08-02-2003, 12:50 PM	#5
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Ok mine has no bracket. And I would guess thats not an item thats available lol. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-02-2003, 03:34 AM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	From what I know the differance between the two are one has cup holders 73+ the other 72 and below has a place for the buckle of the seat belts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.