VA Huge 67-72 parts collection for sale

[VA72C10]

NOW selling individual parts locally or higher dollar parts/parts lots shipped

I have a huge collection of 67-72 parts and am looking to find a new owner....for everything. I prefer All or nothing on this collection....not looking to sell individually as I do not have the time any more to sell parts individually and ship. I will sell in larger bulk items like my NOS parts, dashes, , visor collection, used moldings, etc. Prefer to have items picked up or can possibly deliver/meet someone on the dashes, trim, NOS parts (smaller parts) at or close to the VA or WV borders pending timing as I travel all over VA and WV for work.

Again...ONLY willing to sell as a complete collection or as large bulk purchases or higher dollar items (, all dashes, all NOS, all consoles, etc).

A brief highlight of the parts:

NOS parts (bezels, A/C controller, several sport mirrors, other mirrors, 2 pair door handles, lenses, unity spotlight bulb, etc)
2 speedwarning tach dash setups (with wiring and buzzers) tested working and restored tins with factory pins
3 6cyl tach dashes (rare)- restored tins
4 v8 tach dashes- restored tins
Tach dash tins
Dash parts
complete 3 and 7 hole dashes
Tilt column
Several 3spd and an one nice auto column and parts
Over 25 Center consoles (seatbelt and cupholder-varying condition)
Bucket seat two pair need foam and some frame repair. Multiple sets of bucket seat brackets.
New Parts (Weatherstrip, New suspension parts, lenses, bumpers etc)
swb frame bare w/ crossmembers only
5 and 6 lug front and rears
Stock, rally, and aftermarket 5 and 6 lug wheel sets and individuals
Hoods (all years used varying condition)
Grilles (all years used varying condition)
Fenders (all years used varying condition)
Bumpers (all years and chrome and painted)
Power steering and power brake setups
Engine brackets (stock and aftermarket)
Around 200 pieces of 69-72 lower trim (used varying condition)
Fan shrouds (6cyl, sb, and big block)
Big block parts (frame mounts, brackets)
Hood hinges (several pair)
Vent windows (several sets all need some work-mainly rubber gaskets)
Glass (windshields, side glass, rear glass)
Boxes of wiring- frame, in cab, under hood, extra pigtails/connectors
Dozens of sunvisors
Boxes and boxes of Bolts, fittings, brackets, etc
Tons of emblems
Boxes of mirrors
several Woodgrain glovebox doors
Literature pieces
truck Magazines (hundreds)
Wheel covers
Blazer specific parts
patch panels
Wiring harnesses and wiring
Small block parts new and used

LOTS more...

Will need to be picked up. I will help load. My zip code is 23112. If you mapquest that zip it will get you within 5 minutes of my house.

Will likely need to bring a large box truck or moving truck with a trailer to fit everything...use a couple portable storage containers that can be delivered to you, or take several trips

Link to albums showing pictures of parts...some of these are sold and I've purchased more since this also
http://s562.photobucket.com/user/jro...20April%202010
http://s562.photobucket.com/user/jro...rts%20Pictures


Asking 11,000 or best reasonable offer for everything. This is easily over $35,000 in parts.
Will definitely consider a partial trade for a running, driving 67-72 truck, blazer, or burb in good condition (patina fine but not overly rusty) If trade will value collection at 17k for trade purposes...

Here is a spreadsheet with the most current listing of parts. It's $34,940 Retail worth of parts. And there are many more small parts I haven't listed.
https://docs.google.com/spreadsheet/...FE&usp=sharing

[boraxman]

Man you sure you have to sell it all at once...I have a nice laundry list if you decide otherwise/

[Ozzy2013]

Yea if you ever decide to sell in small quantities please keep me in mind console and seats would be sweet!

[VA72C10]

Originally Posted by boraxman

Man you sure you have to sell it all at once...I have a nice laundry list if you decide otherwise/

Originally Posted by Ozzy2013

Yea if you ever decide to sell in small quantities please keep me in mind console and seats would be sweet!

I am super busy with my job, travel a ton for it, and also have a family with four girls under the age of 10 as well as being active in my Church so I have almost no time to pack and ship parts. It took me weeks to pack and ship the last parts I sold...

[LostMy65]

Hey guys,
You need to look at his Google Docs link he posted.
He is listing things individually with prices.
For example;
He lists the Center Console's price by condition.

[Blazerowner]

I can understand the busy schedule I'm a CPA. As the others stated if you do get time to pack some things up I would be interested in the tilt, any blazer specific parts, some door panels, glove box door and blazer seat brackets. If you decide to seperate shoot me a PM.

[VA72C10]

Okay, I will consider selling the higher dollar items (bucket seats, consoles, tilt column, tach dashes) and will combine parts if it's worth my time

Buckets need foam work and frames have surface rust. Asking 550 plus shipping (around 100-125) for them with truck brackets (aftermarket bracket) same for blazer passenger (factory).
Consoles- 150-200 plus shipping for a nice one needing maybe an extra screw hole or two fixed and paint or I do have one ready for paint (media blasted and started painting satin black for 380 plus shipping finished)
Tilt column- factory correct tilt not a van tilt- new levers and originals 375 plus shipping
Tach dashes depending on options

Again, you will have to bare with me on shipping times and especially on something like the console and tachs I need to finish. Church and family first, work second, and then truck stuff

[1972 Jimmy]

very impressive collection. Good luck with the sale!
Eric

[VA72C10]

Thanks!

[jabborabbo]

6 cylinder tach dash, unrestored, no vacuum gauge, preferably in a medium fawn '67-'68 bezel, shipped to 37334?

[VA72C10]

Originally Posted by jabborabbo

6 cylinder tach dash, unrestored, no vacuum gauge, preferably in a medium fawn '67-'68 bezel, shipped to 37334?

The two 6 cylinder tachs I have are original tachs that I couldn't identify v8 or 6 on the back when I purchased so I sent out to be calibrated professionally. They have been completely tested and are more accurate than factory now.

I will look for a fawn bezel. Can you send a pic of med fawn to confirm we're talking about the same color?

I'd need 400 shipped with the restored tach but the rest of the gauges and tins unrestored.

[jabborabbo]

Originally Posted by VA72C10

The two 6 cylinder tachs I have are original tachs that I couldn't identify v8 or 6 on the back when I purchased so I sent out to be calibrated professionally. They have been completely tested and are more accurate than factory now.

I will look for a fawn bezel. Can you send a pic of med fawn to confirm we're talking about the same color?

I'd need 400 shipped with the restored tach but the rest of the gauges and tins unrestored.

2nd picture of this post shows the color:

http://67-72chevytrucks.com/vboard/s...65&postcount=8

By sending them out to be recalibrated professionally could they have originally been 8 cylinder tachs that are now 6 cylinder?

Thanks!

[VA72C10]

Originally Posted by jabborabbo

2nd picture of this post shows the color:

http://67-72chevytrucks.com/vboard/s...65&postcount=8

By sending them out to be recalibrated professionally could they have originally been 8 cylinder tachs that are now 6 cylinder?

Thanks!

I will check. I may have one that color. On the tachs, as mentioned I couldn't read the codes before so they could have been 6cyl or v8 originally. Now they are perfectly calibrated to work with a 6 cyl. They added resistors to calibrate them. Much better than original with a redone back tin and rescreened face. They look like new originals when in the tach.

I do have one more available I thought was sold. It's a true original 6 cylinder tach. I had the back tin restored by pt and it looks great. I would do the same 400 shipped on that one with unrestored gauges with it as before.

Let me know and I will get pictures of both.

[davido1]

'69 grill and bumper? Hit a deer. Need to replace. Driver quality.

[davido1]

I'm also interested in finding a full '67 front clip at some point.

[Bpilcher72]

you still have a complete bucket seat set?

[Steve Cole]

I would very much like a pair of 71-72 sport mirrors. If you don't want to ship, I could meet you somewhere; You ever go to Danville/lower Virginia area for work?

[70LonghornCST]

That's some collection of parts!

[chevyguy_72]

Do you have any GM buddy bucket frames you would be willing to part with by themselves?

[VA72C10]

Originally Posted by davido1

'69 grill and bumper? Hit a deer. Need to replace. Driver quality.

I have a driver's quality 69 grill. Have a new in box chrome bumper aftermarket. All my other bumpers (chrome and painted) are 71-72

Originally Posted by davido1

I'm also interested in finding a full '67 front clip at some point.

I have a really nice 67/68 hood, a new in box 67/68 rad support, and some nice 68 fenders (would need to weld the marker light holes)

Originally Posted by Bpilcher72

you still have a complete bucket seat set?

Yes, Buckets need foam work and frames have surface rust. Asking 550 plus shipping (around 100-125) for them with truck brackets (aftermarket bracket) same for blazer passenger (factory).
Consoles- 150-200 plus shipping for a nice one needing maybe an extra screw hole or two fixed and paint or I do have one ready for paint (media blasted and started painting satin black for 380 plus shipping finished)

Originally Posted by Steve Cole

I would very much like a pair of 71-72 sport mirrors. If you don't want to ship, I could meet you somewhere; You ever go to Danville/lower Virginia area for work?

I do go to Danville sometimes. No current accounts there but looking for one... I have a dealer in Bracey if you ever go there... 180 for a pair of NOS mirrors, or 260 for a pair of mirrors with NOS backing plates and brackets

Originally Posted by 70LonghornCST

That's some collection of parts!

Thanks

Originally Posted by chevyguy_72

Do you have any GM buddy bucket frames you would be willing to part with by themselves?

Nope, sorry, sold my only set of buddy buckets I had yrs ago. Just missed out on a set recently...

[Syndrome]

Tilt column shipped to 84737? If you still have it.

[VA72C10]

Originally Posted by Syndrome

Tilt column shipped to 84737? If you still have it.

420 shipped.

[DeadheadNM]

Interested in the NOS Fuel gauge - shipping to 59901. Flaws? Thanks, Pete

[VA72C10]

Originally Posted by DeadheadNM

Interested in the NOS Fuel gauge - shipping to 59901. Flaws? Thanks, Pete

It has a small amount of paint rubbed off the needle from being in the box all these yrs. easy fix.

120 shipped with extra packing and insurance.

[DeadheadNM]

If you can touch up so not noticeable I'll take it.