Wtb 8 lug wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne10 · 08-08-2003, 12:26 AM

Wanted set of 4 stock 16" 8 lug GM wheels reasonable priced. I beleive ours came with 6.5" width. Talked to a guy the other day who claimed to have 8" ones off newer truck. I plan to repaint so scuffed or dirty ok. I would like them to be in Oregon or along I-5 towards Seattle area.

email me at cheyennek20@comcast.net

Thanks.

hughnews1 · 08-08-2003, 06:16 AM

i found mine at the truck junkyard nice orig 16" got the s/b and painted .. nice $20 each

cheyenne10 · 08-08-2003, 03:59 PM

Usual run-a-round at yards. Would much rather buy from board member than dig through yards.

Phillip Johnson - do you want to sell the ones back off of your new 71?

*Phillip Johnson* · 08-08-2003, 04:47 PM

I put them on the 72 I just sold last week. Try Les Schwab. They seem to have several. The Ford ones will work and look the same after you paint them white. Just make sure that they are not the new metric ones. The only diff is the center hole is a hair bigger on the Ford rims. I think they are about $20-$25 each. i cant remember.. Good luck. I am getting the 71 aligned next Wednesday before I drive it to LA. I can check then for you.

hughnews1 · 08-09-2003, 07:18 AM

run around junk yard ? hmmmmm i found the truck 16.5" .. took them off myself . got them s/b and painted at the body shop .. white .. then back to junkyard trade them in for 16" chrome A R can you say Nice ?

08-08-2003, 12:26 AM	#1
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Wtb 8 lug wheels Wanted set of 4 stock 16" 8 lug GM wheels reasonable priced. I beleive ours came with 6.5" width. Talked to a guy the other day who claimed to have 8" ones off newer truck. I plan to repaint so scuffed or dirty ok. I would like them to be in Oregon or along I-5 towards Seattle area. email me at cheyennek20@comcast.net Thanks. __________________ Bob

08-08-2003, 03:59 PM	#3
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	wrecking yard run-around Usual run-a-round at yards. Would much rather buy from board member than dig through yards. Phillip Johnson - do you want to sell the ones back off of your new 71? __________________ Bob

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-08-2003, 06:16 AM	#2
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	i found mine at the truck junkyard nice orig 16" got the s/b and painted .. nice $20 each

08-08-2003, 04:47 PM	#4
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	I put them on the 72 I just sold last week. Try Les Schwab. They seem to have several. The Ford ones will work and look the same after you paint them white. Just make sure that they are not the new metric ones. The only diff is the center hole is a hair bigger on the Ford rims. I think they are about $20-$25 each. i cant remember.. Good luck. I am getting the 71 aligned next Wednesday before I drive it to LA. I can check then for you.

08-09-2003, 07:18 AM	#5
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	run around junk yard ? hmmmmm i found the truck 16.5" .. took them off myself . got them s/b and painted at the body shop .. white .. then back to junkyard trade them in for 16" chrome A R can you say Nice ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.