Correct vinyl for 77 bench seat?

[77K10Silverado]

Anyone have luck finding the correct vinyl for 1977 model? I believe its called a 7 panel. I know you can buy the 9 panel but trying to keep it original. If I have to settle, whats the best place to buy a set from? Heres my original and some other examples.

[77K10Silverado]

Here's another original vinyl pic.

[Skunksmash]

Do those metal things hurt your back?

[slimneverdies]

Originally Posted by 77K10Silverado

Here's another original vinyl pic.

Attachment 1288554

This is the color I want but if you get the vinyl where would you get those metal squares is what I wondered...

[E.D.75GMC]

^Only if you leave it sitting in the sun!

[slimneverdies]

Hit these guys up. Can't figure out there website anymore but they have what you want...
info@smsautofabrics.com

[77K10Silverado]

So I actually found them the other day after I posted this and emailed them. They found the material and are sending me a sample to check and confirm color. It's $55 a yard and they said a good interior place could stitch it up. Hmmmm.. Any suggestions there? I'll post a pic of the sample when I get it. Thanks for the response fellers!

[2120]

Don't mean to hi jack, but was the 77 the only year with that color of woodgrain for the dash insert, panels, and bezel? Is there a company making reproductions?

Thanks,
Oscar

[77K10Silverado]

Oscar, I haven't found any yet. Maybe someone else can shed some light. J had to restore my side panels and dash insert by cleaning and spraying them with clear coat. You can find a real good clean gauge bezel floating around eBay once in a while but be prepared $$$!

[truckfan]

watching. been thinking about the same move.

[77K10Silverado]

Here's the wood/metal door panel I clear coated. Not bad for a $4 rattle can spruce up!

[77K10Silverado]

Junkyard!

[slimneverdies]

Originally Posted by 77K10Silverado

Junkyard!

No way no how. I've been in every yard from Pahrump to Lake Havasu looking for parts and nothing even close. That's a negative Ghostrider...

[77K10Silverado]

Here are the samples that were mailed to me by SMS Auto Fabrics. They are in Canby, OR.

The color is spot on but not sure about the material. Just doesn't have the same kind of swirl or grain if you will. Very close and very soft. I'm sure it would be real nice looking.

[slimneverdies]

Have you figured out exactly how much you need to complete your job

[77K10Silverado]

I was told 4 yards.

[slimneverdies]

That's not bad for a vinyl seat that will look original. You must have someone to put it all together. If you see extra square buttons somewhere grab them

[77 Sport]

I found an complete "code W" seat in a local junkyard. Beat and brittle but no tears. It did have the buckles and it can be used as a pattern. I see very few squares in this area so this was a very lucky find.

I got a price to from a Memphis upholstery shop last year. $800 for just to redo the vinyl with the buckles from the old seat (foam not included). It'll have to wait.

FYI - I found these in my 1977 Data Book - The vinyl grain is called Buffalo Hide.

[slimneverdies]

Originally Posted by 77 Sport

I found an complete "code W" seat in a local junkyard. Beat and brittle but no tears. It did have the buckles and it can be used as a pattern. I see very few squares in this area so this was a very lucky find.

I got a price to from a Memphis upholstery shop last year. $800 for just to redo the vinyl with the buckles from the old seat (foam not included). It'll have to wait.

FYI - I found these in my 1977 Data Book - The vinyl grain is called Buffalo Hide.

That's exactly what I'm looking for for my 78

Originally Posted by 77K10Silverado

Here's another original vinyl pic.

Attachment 1288554

I want it like this down to the wood grain bezels...

[77K10Silverado]

Awesome post 77 Sport! I had not seen this data pages before.

I talked to the suggested best upholster person in Winston Salem today's and she told me it usually takes about 4 yards to do a bench. She said around $250 to sew it up and put it on. So I guess after material and labor I'm looking at about $500 for a jammin' factory finish! Sign me up!!!