nv4500 swap with bench seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Campbel45 · 08-28-2014, 03:03 PM

Has anyone done the nv4500 swap with a bench seat? I have a lead on a nv4500 but I want to keep my bench seat. I hear that it makes the 4x4 lever interferes with the seat. Can anyone shed some light on this?

ryanroo · 08-29-2014, 07:29 AM

I did one years ago in the truck in my avatar pic. probably not the same set up you will use, but it worked fine for seat and shifter clearance.

http://67-72chevytrucks.com/vboard/s...75&postcount=2

that post shows the shifters. not sure the tcase shifter is actually hooked to the linkage, but it cleared fine.

snj8198 · 08-29-2014, 02:48 PM

My combo has the transfer case mounted directly to the 4500's tail shaft. The 205 shifter just kisses the bench when shifted into 4wheel. Currently I am moving the drivetrain forward 2 inches so that will be alleviated as well as other clearance issues.

Campbel45 · 08-31-2014, 02:04 PM

Thanks for the info guys. For some reason I was thinking that the shifters would be very close to the seat. Looks like its not that big of an issue.

Bigdav160 · 08-31-2014, 04:20 PM

I think it depends if you move the transfer case back or move the engine forward. The NV4500 is longer than your OE trans.

08-28-2014, 03:03 PM	#1
Campbel45 Registered User Join Date: May 2013 Location: Greenwood, IN Posts: 379	nv4500 swap with bench seat Has anyone done the nv4500 swap with a bench seat? I have a lead on a nv4500 but I want to keep my bench seat. I hear that it makes the 4x4 lever interferes with the seat. Can anyone shed some light on this?

08-29-2014, 07:29 AM	#2
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: nv4500 swap with bench seat I did one years ago in the truck in my avatar pic. probably not the same set up you will use, but it worked fine for seat and shifter clearance. http://67-72chevytrucks.com/vboard/s...75&postcount=2 that post shows the shifters. not sure the tcase shifter is actually hooked to the linkage, but it cleared fine. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

08-29-2014, 02:48 PM	#3
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: nv4500 swap with bench seat My combo has the transfer case mounted directly to the 4500's tail shaft. The 205 shifter just kisses the bench when shifted into 4wheel. Currently I am moving the drivetrain forward 2 inches so that will be alleviated as well as other clearance issues. __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's

08-31-2014, 02:04 PM	#4
Campbel45 Registered User Join Date: May 2013 Location: Greenwood, IN Posts: 379	Re: nv4500 swap with bench seat Thanks for the info guys. For some reason I was thinking that the shifters would be very close to the seat. Looks like its not that big of an issue.

08-31-2014, 04:20 PM	#5
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: nv4500 swap with bench seat I think it depends if you move the transfer case back or move the engine forward. The NV4500 is longer than your OE trans. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.