6-cylinder fender emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

circa73 · 08-29-2014, 10:24 AM

Does anyone know a source to buy some fender emblems for the 6 cylinder?
I can find 8-350, 400 etc....but a set of 6-250's would really set off my build.

**too much stuff** · 08-29-2014, 10:35 AM

No factory ones for these trucks, but i know camaros and i think novas had 250 emblems. They don't look anything like the truck ones however.

circa73 · 08-29-2014, 12:03 PM

Scottcoda · 08-30-2014, 06:01 AM

I also been searching for 6 banger emblems for my 2500... all I can find is V-eight 2500 emblems.. not even sure what fender badges were put on low optioned GMC 2500 trucks if any..

**too much stuff** · 08-30-2014, 11:26 AM

Quote:

Originally Posted by Scottcoda

I also been searching for 6 banger emblems for my 2500... all I can find is V-eight 2500 emblems.. not even sure what fender badges were put on low optioned GMC 2500 trucks if any..

Would still have fender badges. Your truck would have gmc 2500 or gmc 2500 V-6

Scottcoda · 08-30-2014, 01:21 PM

Quote:

Originally Posted by too much stuff

Would still have fender badges. Your truck would have gmc 2500 or gmc 2500 V-6

Aahh but here is the thing .... I have an INLINE 6!!!! Would the fender badge just say GMC on top with 2500 on the bottom left and the bottom right blank??? I have seen something like this but for later years.

**too much stuff** · 08-30-2014, 02:44 PM

Quote:

Originally Posted by Scottcoda

Aahh but here is the thing .... I have an INLINE 6!!!! Would the fender badge just say GMC on top with 2500 on the bottom left and the bottom right blank??? I have seen something like this but for later years.

Yes, i believe that is correct.

**slomotion** · 08-30-2014, 05:23 PM

I couldn't find anything specific so had to make up my own.....

EARNHARDT#3 · 08-30-2014, 05:48 PM

That looks sharp slomotion!

RThree · 08-30-2014, 06:09 PM

Here is the original 292 fender emblem on my 72 Custom/20 Longhorn. Hoping to soon replace them with 454 v8 emblems!

**slomotion** · 08-30-2014, 06:40 PM

Quote:

Originally Posted by RThree

Here is the original 292 fender emblem on my 72 Custom/20 Longhorn. Hoping to soon replace them with 454 v8 emblems!

Cool! Any idea what year GM started installing those badges? I don't recall ever seeing them before.

**'68OrangeSunshine** · 08-30-2014, 10:19 PM

Quote:

Originally Posted by RThree

Here is the original 292 fender emblem on my 72 Custom/20 Longhorn. Hoping to soon replace them with 454 v8 emblems!

RThree, When your 292 badges become surplus to your requirments, would you consider letting them go?

RThree · 08-31-2014, 04:58 PM

Quote:

Originally Posted by '68OrangeSunshine

RThree, When your 292 badges become surplus to your requirments, would you consider letting them go?

'68OrangeSunshine I would have no need for them and would put them up for sale or trade. I will be in need of a set of Longhorn badges.

factorystock · 08-30-2014, 07:17 PM

Quote:

Originally Posted by circa73

Does anyone know a source to buy some fender emblems for the 6 cylinder?
I can find 8-350, 400 etc....but a set of 6-250's would really set off my build.

Chevy trucks never had emblems for the 250 base engine, the optional engines received emblems '69-'72. Looks like some nice machining work circa73

RANDY COX · 08-30-2014, 09:37 PM

I found this emblem pretty sure it came off of a nova pd 5.00 bucks for it at a flea market
was gonna put them on my fleetline on the fender but only had 1 so I put it on the trunk lid of my 48...

They would look KOOL on a truck fender too.

circa73 · 08-31-2014, 11:51 AM

I found a machinist who took my sketch and made this. He can make these with whatever cylinder and CID you choose. Im going to have mine made in aluminum.

08-29-2014, 10:24 AM	#1
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	6-cylinder fender emblems Does anyone know a source to buy some fender emblems for the 6 cylinder? I can find 8-350, 400 etc....but a set of 6-250's would really set off my build.

08-29-2014, 10:35 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: 6-cylinder fender emblems No factory ones for these trucks, but i know camaros and i think novas had 250 emblems. They don't look anything like the truck ones however. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-30-2014, 06:01 AM	#4
Scottcoda Registered User Join Date: Jun 2013 Location: Brant Lake New York Posts: 224	Re: 6-cylinder fender emblems I also been searching for 6 banger emblems for my 2500... all I can find is V-eight 2500 emblems.. not even sure what fender badges were put on low optioned GMC 2500 trucks if any.. __________________ 68 GMC 2500 stepside LWB 250CI

08-30-2014, 05:23 PM	#8
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Re: 6-cylinder fender emblems I couldn't find anything specific so had to make up my own..... Attached Images __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."

08-30-2014, 05:48 PM	#9
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: 6-cylinder fender emblems That looks sharp slomotion!

08-29-2014, 12:03 PM	#3
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: 6-cylinder fender emblems

08-30-2014, 06:09 PM	#10
RThree Registered User Join Date: Jun 2014 Location: Santa Rosa, CA Posts: 124	Re: 6-cylinder fender emblems Here is the original 292 fender emblem on my 72 Custom/20 Longhorn. Hoping to soon replace them with 454 v8 emblems! Attached Images __________________ - 1972 K20 Longhorn, 4wd conversion. "TAWNKAA" Project. 292ci Inline 6 / '93 NV4500 / 32 spline 205 TC / Dana 60s front & back / rear Detroit Locker / 4.10 Gears / 35" BFG MT KM2 / 4" Tuff Country lift. "TAWNKAA"Build Thread http://67-72chevytrucks.com/vboard/s....php?p=6823933 - 1970 C10 Lonbed, 292ci Inline 6, 3 on the tree, stock.

08-30-2014, 09:37 PM	#15
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 6-cylinder fender emblems I found this emblem pretty sure it came off of a nova pd 5.00 bucks for it at a flea market was gonna put them on my fleetline on the fender but only had 1 so I put it on the trunk lid of my 48... They would look KOOL on a truck fender too. __________________ 1964 BBC 402 4x4

08-31-2014, 11:51 AM	#16
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: 6-cylinder fender emblems I found a machinist who took my sketch and made this. He can make these with whatever cylinder and CID you choose. Im going to have mine made in aluminum.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.