3/4" drop, spindles or springs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WiggyHD · 09-08-2014, 07:12 PM

I am wanting to do a 3/4 drop, and I have seen kits without spindles and with spindles. Will doing just springs screw up the geometry, or is it best to use drop spindles?

Thanks!
Mark

**PGSigns** · 09-09-2014, 08:30 AM

I have that drop in my 66 with just springs. Installed them and got it aligned does just fine. I also did the adjustable track bar.
Jimmy

09-08-2014, 07:12 PM	#1
WiggyHD Registered User Join Date: Mar 2014 Location: Mena, Arkansas Posts: 91	3/4" drop, spindles or springs? I am wanting to do a 3/4 drop, and I have seen kits without spindles and with spindles. Will doing just springs screw up the geometry, or is it best to use drop spindles? Thanks! Mark __________________ Retired Air Force/Disabled Vet 1969 Chevy C-10, On the way to greatness!

09-09-2014, 08:30 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: 3/4" drop, spindles or springs? I have that drop in my 66 with just springs. Installed them and got it aligned does just fine. I also did the adjustable track bar. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.