any one got C20 stance photos? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69 XCamper · 08-13-2003, 04:28 PM

I'd like to see some C20's that have been lowered. Mines stock height with rear leaf springs. I've heard of an axle flip, is that the same as a c-notch kit? and how much drop can you get out of that?

Slammed67 · 08-13-2003, 05:55 PM

An axle flip is when you relocate the axle so that it is sitting on top of the springs as oppsed to underneath them as they are now. A c-notch is where to notch out the frame right above the axle to allow more suspension travel on a lowered vehicle. If you go with the axle flip, you'll probably want to c-notch the frame also.

Slammed67 · 08-13-2003, 06:00 PM

Oh, and for how much drop that'll give you, measure from the center of the axle to the bottom of the leaf springs. Double that number and then add the thickness of the leaf springs.

special70gmc · 08-13-2003, 08:49 PM

pics

special70gmc · 08-13-2003, 08:50 PM

2

special70gmc · 08-13-2003, 08:50 PM

3 llast

69 XCamper · 08-13-2003, 09:10 PM

How did you lower your truck, I assume drop spindles on the front, but what about the rear?

special70gmc · 08-13-2003, 09:32 PM

i have 2'' drop springs and 21/2 drop 3/4 ton spindals. i fliped the rear over the leafs with home made spring mounts. there is still no front end , engine,tranny ect.. so it still will drop down some also im not going to use those tires/wheels cause there 16.5s and there going to rub other wise. im so excited that i can finally see the ride height i know that not alot of people lower 3/4s but i didnt see why not. -kyle

08-13-2003, 04:28 PM	#1
69 XCamper Registered User Join Date: Feb 2003 Location: Lake In The Hills, IL Posts: 28	any one got C20 stance photos? I'd like to see some C20's that have been lowered. Mines stock height with rear leaf springs. I've heard of an axle flip, is that the same as a c-notch kit? and how much drop can you get out of that? Attached Images __________________ 69 Chevy C20 (stock & waiting) 69 Datsun Roadster SPL311 (still waiting for resto) 02 Hyundai Elantra GT 00 Ford Expedition 99 Coleman Utah Lake In The Hills, Illinois

08-13-2003, 05:55 PM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	An axle flip is when you relocate the axle so that it is sitting on top of the springs as oppsed to underneath them as they are now. A c-notch is where to notch out the frame right above the axle to allow more suspension travel on a lowered vehicle. If you go with the axle flip, you'll probably want to c-notch the frame also. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

08-13-2003, 06:00 PM	#3
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Oh, and for how much drop that'll give you, measure from the center of the axle to the bottom of the leaf springs. Double that number and then add the thickness of the leaf springs. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

08-13-2003, 08:49 PM	#4
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	pics Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

08-13-2003, 08:50 PM	#5
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	2 Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

08-13-2003, 08:50 PM	#6
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	3 llast Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

08-13-2003, 09:10 PM	#7
69 XCamper Registered User Join Date: Feb 2003 Location: Lake In The Hills, IL Posts: 28	Hey special70gmc How did you lower your truck, I assume drop spindles on the front, but what about the rear? __________________ 69 Chevy C20 (stock & waiting) 69 Datsun Roadster SPL311 (still waiting for resto) 02 Hyundai Elantra GT 00 Ford Expedition 99 Coleman Utah Lake In The Hills, Illinois

08-13-2003, 09:32 PM	#8
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	i have 2'' drop springs and 21/2 drop 3/4 ton spindals. i fliped the rear over the leafs with home made spring mounts. there is still no front end , engine,tranny ect.. so it still will drop down some also im not going to use those tires/wheels cause there 16.5s and there going to rub other wise. im so excited that i can finally see the ride height i know that not alot of people lower 3/4s but i didnt see why not. -kyle __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.