WI WTB 67 rear stepside fenders, IE No reflectors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan Duke · 10-04-2014, 05:34 PM

Please post if you know anybody with rear stepside fenders for a 67. I am not interested in the spare cut out style. Thank you

JimKshortstep4x4 · 10-04-2014, 07:14 PM

You are probably looking for a pair but I have a good right side 67 Fender. If you have an interest in it I can post pictures.

Jim

Ryan Duke · 10-05-2014, 07:22 AM

Hey jim I would most deffinantly be interested In a good fender. I have pretty sweet 68 and up rear fenders but I just cant find myself miss matching stuff on my build.

JimKshortstep4x4 · 10-05-2014, 07:08 PM

I will take some pictures and post them tomorrow.

Jim

colgad · 10-05-2014, 09:52 PM

I have a set of 67's
Not sure if your still looking or not.

JimKshortstep4x4 · 10-06-2014, 11:05 AM

It looks like you have a possibility of a set of fenders. I will wait to post pictures as it would be better for you to get a pair.

Jim

68is4me · 10-06-2014, 01:52 PM

Did you say you had a nice set of 68 fenders? hmmm. I have a nice set of 67's but I would like 68's.

The 67's are still on the truck and in primer. The lt side has a fuel fill on the top. would you be interested in a possible trade? I can get pics if interested.

Ryan Duke · 10-06-2014, 09:41 PM

I actually have 3 sets of fenders. The black ones are straight but rust in the front by step. The yellow ones are rusty on the top bottoms look good for metal patches. The blue and white one are as good as tou could ask for. Blue one has two dents in the corners

Ryan Duke · 10-06-2014, 09:45 PM

I have a line on a super nice pair In texas but I'm trying to figure shipping out. It doesn't look the best tho. I would be down for trades or I could split up my stuff. I have sides and fronts even a tail gate possibly. All short box stuff

cypressbog · 10-07-2014, 01:04 PM

PM sent on driver side with cut-out.

10-04-2014, 05:34 PM	#1
Ryan Duke Registered User Join Date: Apr 2013 Location: Wayne, Wisconsin Posts: 126	WTB 67 rear stepside fenders, IE No reflectors Please post if you know anybody with rear stepside fenders for a 67. I am not interested in the spare cut out style. Thank you

10-04-2014, 07:14 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: WTB 67 rear stepside fenders, IE No reflectors You are probably looking for a pair but I have a good right side 67 Fender. If you have an interest in it I can post pictures. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

10-05-2014, 07:22 AM	#3
Ryan Duke Registered User Join Date: Apr 2013 Location: Wayne, Wisconsin Posts: 126	Re: WTB 67 rear stepside fenders, IE No reflectors Hey jim I would most deffinantly be interested In a good fender. I have pretty sweet 68 and up rear fenders but I just cant find myself miss matching stuff on my build.

10-05-2014, 07:08 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: WTB 67 rear stepside fenders, IE No reflectors I will take some pictures and post them tomorrow. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

10-05-2014, 09:52 PM	#5
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: WTB 67 rear stepside fenders, IE No reflectors I have a set of 67's Not sure if your still looking or not. __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

10-06-2014, 11:05 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: WTB 67 rear stepside fenders, IE No reflectors It looks like you have a possibility of a set of fenders. I will wait to post pictures as it would be better for you to get a pair. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

10-06-2014, 01:52 PM	#7
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: WTB 67 rear stepside fenders, IE No reflectors Did you say you had a nice set of 68 fenders? hmmm. I have a nice set of 67's but I would like 68's. The 67's are still on the truck and in primer. The lt side has a fuel fill on the top. would you be interested in a possible trade? I can get pics if interested.

10-06-2014, 09:41 PM	#8
Ryan Duke Registered User Join Date: Apr 2013 Location: Wayne, Wisconsin Posts: 126	Re: WTB 67 rear stepside fenders, IE No reflectors I actually have 3 sets of fenders. The black ones are straight but rust in the front by step. The yellow ones are rusty on the top bottoms look good for metal patches. The blue and white one are as good as tou could ask for. Blue one has two dents in the corners Attached Images

10-06-2014, 09:45 PM	#9
Ryan Duke Registered User Join Date: Apr 2013 Location: Wayne, Wisconsin Posts: 126	Re: WTB 67 rear stepside fenders, IE No reflectors I have a line on a super nice pair In texas but I'm trying to figure shipping out. It doesn't look the best tho. I would be down for trades or I could split up my stuff. I have sides and fronts even a tail gate possibly. All short box stuff

10-07-2014, 01:04 PM	#10
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB 67 rear stepside fenders, IE No reflectors PM sent on driver side with cut-out.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.