rear window rubber molding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ricks1971** · 10-19-2014, 02:41 PM

Hey guys who make the best rear window rubber gasket or molding? My back window has the ss trim. thanks Rick

kcsa75 · 10-19-2014, 04:14 PM

You want the Precision brand. Contact GMCPaul or Classic Heartbeat. Both support the forum.

Sammy · 10-19-2014, 07:04 PM

Really I try to use Precision from one of ours board vendors even if they are just above some of the others price wise. However in the past I have used LMC rubber with about 90% satisfaction. One clearly marked 67-72 on the rubber n on the package label in a box. Only to find out after sitting on my shelf for two years it was 2 1/2 inches too big. Too much time had passed to make a stink. But a later purchased LMC non-trim type fit great. Both seals were not my actual purchase but got them thru a third party.

**zicc1835** · 10-19-2014, 07:30 PM

i jus bought a prescion ss trim rear window gasket from Tom tkorinek the installer had no issue with it was a slider on a 72... what i did find out is the new gaskets don't fit on the old windshields which are thicker than the repop windshields

**Classic Bowties** · 10-20-2014, 01:10 PM

Quote:

Originally Posted by Ricks1971

Hey guys who make the best rear window rubber gasket or molding? My back window has the ss trim. thanks Rick

Hi Rick, if this is for your 67 then your truck must have the optional A10 panoramic cab. If it were my truck, precision part #WCR 1092 T is the way to go and if needed I have it on hand ready to ship. I should be getting your tilt all buttoned up this afternoon, the column and color change came out looking sweet! Do you want to see a few pics, or would you rather save the #514 color suspense a surprise till opening up the box? Mel

**Classic Bowties** · 10-23-2014, 11:40 PM

Well... this am the puter said that your freshly rebuilt tilt column and new dlx rubber was on the truck and out for delivery. Are we happy with the final results, what do you think about your choice in color? Mel

10-19-2014, 02:41 PM	#1
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	rear window rubber molding Hey guys who make the best rear window rubber gasket or molding? My back window has the ss trim. thanks Rick

10-19-2014, 04:14 PM	#2
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: rear window rubber molding You want the Precision brand. Contact GMCPaul or Classic Heartbeat. Both support the forum. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

10-19-2014, 07:04 PM	#3
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: rear window rubber molding Really I try to use Precision from one of ours board vendors even if they are just above some of the others price wise. However in the past I have used LMC rubber with about 90% satisfaction. One clearly marked 67-72 on the rubber n on the package label in a box. Only to find out after sitting on my shelf for two years it was 2 1/2 inches too big. Too much time had passed to make a stink. But a later purchased LMC non-trim type fit great. Both seals were not my actual purchase but got them thru a third party. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

10-19-2014, 07:30 PM	#4
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,246	Re: rear window rubber molding i jus bought a prescion ss trim rear window gasket from Tom tkorinek the installer had no issue with it was a slider on a 72... what i did find out is the new gaskets don't fit on the old windshields which are thicker than the repop windshields __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

10-23-2014, 11:40 PM	#6
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,686	Re: rear window rubber molding Well... this am the puter said that your freshly rebuilt tilt column and new dlx rubber was on the truck and out for delivery. Are we happy with the final results, what do you think about your choice in color? Mel

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.