Riverside CA shops - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thumpernickle · 10-21-2014, 03:49 AM

I recently blew my motor in my 1979 Silverado and need the motor rebuilt or replaced with a crate 350. I have recently moved to Riverside, CA and haven't found a shop I like. Does anyone on here have a recommendation for a shop in the greater Riverside/Corona/Inland Empire? Thanks.

tommartin · 10-21-2014, 12:38 PM

hey whats going on!

Im in the Riverside area.

I was looking around for a rebuild shop my self about a year ago.

For the prices that i got for a rebuild i would go for new crate 350.

I ended up buying a motor off of Craigslist for $150 and building that up.

thumpernickle · 10-21-2014, 05:44 PM

Thanks for your reply tommartin. I agree that a crate 350 is a good deal, especially if a rebuild gets even close to $1000. I am seriously considering a crate 350, but I am not able to install it myself and would like to find a reputable shop to install it if I go that route.

**leddzepp** · 10-21-2014, 10:58 PM

I don't know of any shops...but I'm an OG from C-town now living in Riverside as well.

slam59 · 10-22-2014, 01:11 PM

I'm in the high desert and have a good mechanic I can hook u up with. Plus a shop up here sells them. At work now will pm U after work with info

tommartin · 10-22-2014, 01:49 PM

Quote:

Originally Posted by slam59

I'm in the high desert and have a good mechanic I can hook u up with. Plus a shop up here sells them. At work now will pm U after work with info

share the info brother... always good to know. My dad has a 283 from his belair that i have been think about rebuilding...

K5owner · 10-22-2014, 04:03 PM

I would not bother with rebuilding it. Very few shops now take the time to do it right. Here is one I had build my big block when I was in high school 20 years ago. He does good work.
http://www.dougansracing.com/index.html

With that said I would recommend you go this route.
http://www.jegs.com/i/Chevrolet+Perf...67353/10002/-1

$1500 shipped for a 260 HP 350 ft lbs of torque 350 with 4 bold mains and a 3 year 100K mile warranty is very tough to beat budget wise.

BTW I was born and raised in Corona and graduated class of 96' from Corona. Now I am in San Bernardino. If you need a hand or some advice give me a shout.

thumpernickle · 10-23-2014, 12:35 AM

I really appreciate the replies and suggestions. Now that I have recovered from the shock of killing my engine, I think a Crate 350 from Chevrolet Performance is probably the route I will take. But I will still need someone to install it. Any recommendations for a good shop to install a new Crate 350?

10-21-2014, 03:49 AM	#1
thumpernickle Registered User Join Date: Sep 2009 Location: Colton, CA Posts: 19	Riverside CA shops I recently blew my motor in my 1979 Silverado and need the motor rebuilt or replaced with a crate 350. I have recently moved to Riverside, CA and haven't found a shop I like. Does anyone on here have a recommendation for a shop in the greater Riverside/Corona/Inland Empire? Thanks.

10-21-2014, 12:38 PM	#2
tommartin Registered User Join Date: Aug 2013 Location: So*Cal - Riverside, CA Posts: 85	Re: Riverside CA shops hey whats going on! Im in the Riverside area. I was looking around for a rebuild shop my self about a year ago. For the prices that i got for a rebuild i would go for new crate 350. I ended up buying a motor off of Craigslist for $150 and building that up.

10-21-2014, 05:44 PM	#3
thumpernickle Registered User Join Date: Sep 2009 Location: Colton, CA Posts: 19	Re: Riverside CA shops Thanks for your reply tommartin. I agree that a crate 350 is a good deal, especially if a rebuild gets even close to $1000. I am seriously considering a crate 350, but I am not able to install it myself and would like to find a reputable shop to install it if I go that route.

10-21-2014, 10:58 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Riverside CA shops I don't know of any shops...but I'm an OG from C-town now living in Riverside as well. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-22-2014, 01:11 PM	#5
slam59 Registered User Join Date: Nov 2011 Location: So. Calif Posts: 305	Re: Riverside CA shops I'm in the high desert and have a good mechanic I can hook u up with. Plus a shop up here sells them. At work now will pm U after work with info __________________ 1974 C10 swb 350 1977 3/4 ton Silverado 454 1999 2 door 2wd Tahoe

10-22-2014, 04:03 PM	#7
K5owner Registered User Join Date: Mar 2014 Location: CA Posts: 168	Re: Riverside CA shops I would not bother with rebuilding it. Very few shops now take the time to do it right. Here is one I had build my big block when I was in high school 20 years ago. He does good work. http://www.dougansracing.com/index.html With that said I would recommend you go this route. http://www.jegs.com/i/Chevrolet+Perf...67353/10002/-1 $1500 shipped for a 260 HP 350 ft lbs of torque 350 with 4 bold mains and a 3 year 100K mile warranty is very tough to beat budget wise. BTW I was born and raised in Corona and graduated class of 96' from Corona. Now I am in San Bernardino. If you need a hand or some advice give me a shout.

10-23-2014, 12:35 AM	#8
thumpernickle Registered User Join Date: Sep 2009 Location: Colton, CA Posts: 19	Re: Riverside CA shops I really appreciate the replies and suggestions. Now that I have recovered from the shock of killing my engine, I think a Crate 350 from Chevrolet Performance is probably the route I will take. But I will still need someone to install it. Any recommendations for a good shop to install a new Crate 350?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.