DUmb Question

[BigBlu72]

I have a 72 GMC 3/4 ton and was wondering if any one knows a good way to clean the door panels? I have tried soap water and a sponge but doesn't seem to get in all textured areas.

Thank you

[geezer#99]

Try hand cleaner that has pumice in it.

[Lemield]

Originally Posted by BigBlu72

I have a 72 GMC 3/4 ton and was wondering if any one knows a good way to clean the door panels? I have tried soap water and a sponge but doesn't seem to get in all textured areas.

Thank you

I have always had good luck with 409 for door panels.....

[chevy2tom]

Mr clean Magic eraser

[BigBlu72]

Thank you all i will try those methods

[low&slow]

I use either windex or purple power. Usually I water down the purple power though.

[Mac93]

Originally Posted by low&slow

I use either windex or purple power. Usually I water down the purple power though.

I use the same method

[Mikeeal33]

You can use ANY of those products, they'll all work, with a brush. They're at Wal-Mart for scrubbing dishes, like $3. Shoot you might have one in the kitchen right now you could go steal.

[ho70]

Originally Posted by chevy2tom

Mr clean Magic eraser

X2

[aod92]

Use a diluted degreaser like purple power.

[wreckedchevy]

I've been told that soaking them in the bath tub is a good way to get them really clean as well haven't tried it yet

[67swb72klb]

x3 on the brush

[hooverfish]

Media blast your door panels. check this thread.

http://67-72chevytrucks.com/vboard/s...ast+door+panel

I did my 72 parchment panels and they look new. Also, use spray clear 'satin' or semi=gloss paint to seal the plastic, if you don't it wont clean up when it gets dirty. Mine are now 2 years since blasting and still look new with a damp rag. You can prob. get yours done for $40 or so.