![]() |
|
![]() |
#1 |
Registered User
Join Date: Aug 2012
Location: nantucket,ma
Posts: 230
|
weight of bed
does anybody have a idea what a 6ft. fleet side bed for a 72 c10 weighs? thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: weight of bed
6' bed is about 320 pounds. That's from a newer truck, but should be close. Four guys.
I found mine to be a LOT heavier until I found the extra strap the original owner had added between the trailer hitch and the bed rails. Just about snapped my lift before I realized "there's no way it's that heavy...."
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: weight of bed
I dont know the actual weight but it only took me and 2 friends to lift the whole thing off without the tailgate on it if that helps
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2014
Location: Chilliwack, BC
Posts: 139
|
Re: weight of bed
Me and my brother lifted mine off the stand and put on it on the truck, then I went to the doctor because I blew my intense out my a$$.
![]()
__________________
1972 Chevy shortbox, done up 396bbc 1968 Plymouth Roadrunner, 1000hp twin 72mm turbos 2017 F350 Lariat, 6.7, stock except leveling kit and larger tires 2014 nissan pathfinder sl (the kid hauler) |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2014
Location: Los Angeles area :(
Posts: 499
|
Re: weight of bed
I feel like my original 8' wood floor bed was lighter or close to my Repo steel floor 6' bed. Me and one person, but I swear the 6' felt heavier.
__________________
'68 C10 SWB '85 K30 Blazer |
![]() |
![]() |
![]() |
#6 |
Lurky lurky
Join Date: Sep 2005
Location: Maryville, TN
Posts: 553
|
Re: weight of bed
I would guess 400 lbs or so. With 1 person on each corner I've taken a few long beds off with tailgates attached and not had too much of an issue.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: weight of bed
415lb is the difference between a chassis-cab and a fleetside on a 107" wb.
GM lists the E81 floorboard (wood bed) to be 15lb heavier without distinction as to length.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban Last edited by SS Tim; 12-27-2014 at 01:28 AM. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2014
Location: Paducah,KY
Posts: 65
|
Re: weight of bed
I weighed a long bed with steel floor and tailgate at local CO-OP scales on my trailer. The amount of gas I had between full/empty trailer was different,so I had to give it a range of 460-500 lbs.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Oct 2010
Location: Kansas City
Posts: 3,590
|
Re: weight of bed
Like some of the others, I've moved several longbeds with two of my sons/sons-in-law and me. Not really a problem at all.
__________________
Willie Swamp Angel Truckers '72 C10 Highlander ![]() People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't. ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2012
Location: nantucket,ma
Posts: 230
|
Re: weight of bed
thanks for the replies
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|