TX mega c10 sale

[Zackarymc]

Parting out a very clean 1962 c10, 64 c10 left overs from build, and 84 c10 stuff< 62 stuff is all obo please text me for pictures 713-960-3541


the 1962 is already in pieces so dont ask me how much for the whole thing.... i have pictures of everything!

1962
Complete swb rolling chassis- sand blasted and paint started < def not the best job but looks clean $500
Cab 90% rust free- only part that has rust is the lower door weather strip area with title $750.00
standard heater with controller, harness and vents < make offer this is not a delux heater
gauge cluster and wire harness - spedo needle broken but harness is uncut < make offer
Front grill support -- 134
Left fender- 150 oe very solid ide say 99% rust free SOLD
Right fender- 100 has bubbles showing up on lower rear but zero holes SOLD
Cowl panels -- 50 each rust free blasted and primered, or I have 2 well used ones for 30
Left and right doors with glass and mechanisms- 250 each, these are rust free examples SOLD
Inner fenders- 100 bucks for the pair< have two sets and both in ok condition
Hood- it's a 8 out of 10- 300 bucks
Inner door panels -- one is flawless the other has a pouch tap screwed onto it - 150 pair
Grill- pretty thrashed but useable -- 50
Fleet side bed sides- long bed 200 for the pair the pass side has some damage but fixable 95% rust free
Front endbed panel -- 75 bucks- 100% rust free and un damaged
Rear cross still- 85 < this can only be used with 60-62
Wheel housings- 125 for the pair- perfect condition
Rear small window glass 15 bucks
Choke cable- 10
Spedo cable--5
Front glove box door- 15
Seat needs cover and a little foam work 125 SOLD
Door handles- 20 pair
Steel rear roll pan- 75 new in box
Lowered rear coils- 75 new <don't remember drop but they are short
Dual master cly- lmc part #34-4003- 5 bucks needs rebuild
Parking brake cable and handle long bed -20
Clutch and brake pedal assy- 15 bucks
1964 c10 new parts all unused
Disc swap with spindle drop- 499
Rebuilt a arms with moog product- 200
Front air ride cups/plate- 50 < used
Rear bag cups-50 < new
Front crosmember -- 50
1984 c10
Front spindle set up complete 100
Djm dropped lower control arms 125

[60-66]

interested in pictures of Wheel housings- 125 for the pair- perfect condition

[whateverpratt]

Interested in pictures of frame and cab.

[Zackarymc]

wheel housings

[Zackarymc]

the cab.... i have many pictures of the cab- please text me its easier to send them

[60-66]

any dents or rust issues ?

[Zackarymc]

couple of the areas where the bolts go have been tore off look at one of the pictures and you can see it. Ide say dent free. when i go back to the storage ill take a pic with the straight edge on them

[Zackarymc]

chassis

[AngryPirate]

I'll go next in line for the cab. I'm in Austin, so I can run down there and fetch it.

Thanks,
Scott

[AngryPirate]

Originally Posted by AngryPirate

I'll go next in line for the cab. I'm in Austin, so I can run down there and fetch it.

Thanks,
Scott

I guess I should add, if you have more pictures handy, PM me and I can shoot you my email or text (whichever is easier).

Thanks,
Scott

[Zackarymc]

sent pm

[jmader]

Can I get some pics of the bedsides?

[Zackarymc]

please text me 713-960-3541 its easier to send pics! how are you planning on shipping?

[rwade]

PM sent on doors.

Thanks, Wade

[jmader]

Originally Posted by Zackarymc

please text me 713-960-3541 its easier to send pics! how are you planning on shipping?

I have a greyhound here I was hoping to go that route unless it's too ridiculous in price. I will text you later in the day for some pictures.

[Zackarymc]

djm 3" drop with factory coils. built for 73-87 c10's. they are 400 new from summit but they need ball joints. taKES 15 dollar factory ones.

[64chevtruck]

Im interested in the DJM lower control arms, any idea on the drop they give? are they set up for bags or springs? what year truck are they for>?.

Thanks

[argonaut]

Does the 62 grill have the mount plates on the back and headlight buckets still intact?
How are much to ship to 90815?

[crhyno]

Is the 62 gauge cluster the deluxe or standard? Do you have a pic? Thanks

[Zackarymc]

grill is a 63-66 my bad! the dash only has fuel gauge and spedo rest are dummy lights. Dunno if thats delux or standard for 62.

[Zackarymc]

i do have two 62 head light surrounds... painted not chrome

[iceman777]

hi im looking for the washer nozzles and bottle and bracket if you have them please

[Zackarymc]

dont have them

[rpone605]

Originally Posted by Zackarymc

i do have two 62 head light surrounds... painted not chrome

Still have these?

[Leroy-B1]

Pics of the fenders and the back bed brace....please put me in line pending pics