springs or spindles??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC69 · 08-24-2003, 06:16 PM

Here is my question. I am lowering the rear of my 69 gmc LWB 4" with coils and may relocate the shocks and get an adjustable panhard bar.

In the front I was wondering if I should go with drop spindles or drop springs. I heard that the springs from the 73-87 will fit also, so regardless if I change my front suspension to a newer style or not I should be fine. But will I still be able to get the front aligned after???

smokekiki · 08-25-2003, 11:12 AM

I have 2.5 drop spindles and 1" shorter springs.No problem with alinement.

crazy longhorn · 08-25-2003, 02:25 PM

On a spring drop only (front), you should stay with no more that 2" to keep geometry right on. There are guys running 3 " drop springs on the front, or cut coils(mine) & I beleive I have seen 4" springs listed......the spindle is the better way to go

If you do a 2 1/2" spindle, you can add up to a 2" spring & have a really nice drop without alignment problems. Good luck, crazyL

phantom dually · 08-25-2003, 06:05 PM

Spindle is a much better choice as you will use it with springs or bags at a later date!

GMC69 · 08-25-2003, 08:16 PM

I would have to agree about the fact that spindles are much better.

I guess it was more or a cost thing, since anything I decide to do will be a minimum X2 in price since I Live in Canada, a pair of springs is about 200-300$ where in the US it's about 99$ so figure drop spindles are about 250$ US wich translates into at least 500$. So by going with springs right now I can get the whole truck lowered along with an adjustable panhard bar and possibly relocate the shocks ( rear ) for the same price.
So more bang for the buck.

Besides at this point the truck will mostly be used on occasion when I am in town ( couple times a week during summer months). So as long as I can get the alignment correct then I'm happy.

GMC69 · 08-26-2003, 12:37 AM

On this same topic

Does anyone know the difference between the fron coils on the 67-72 trucks and the 73-87 trucks, and can I use one on the other.

Tx Firefighter · 08-26-2003, 05:30 PM

Quote:

Originally posted by GMC69
On this same topic

Does anyone know the difference between the fron coils on the 67-72 trucks and the 73-87 trucks, and can I use one on the other.

They directly interchange with each other. I've done it countless times. I'm doing it again this weekend.

GMC69 · 08-26-2003, 06:01 PM

Quote:

Originally posted by Tx Firefighter

They directly interchange with each other. I've done it countless times. I'm doing it again this weekend.

Thanks TX

Now I KNOW that I can get one of the kits available from the fine suppliers on this forum.

I have started goign through each link one by one looking for a kit. Found a couple if them now to compare them and figure what will be cheaper for shipping.

Since I live in Canada I have to pay that god D@mn duty too.

If any of the suppliers read this and want to pm me go for it.

THis is what I want.

2" front drop coils
4" rear drop coils
adjustable panhard bar
( possibly) rear shock relocators ( do you think it is neccessary??)

Shocks I can buy around here so I don't pay extra shipping and extra duty and what not.

Thanks once again for all the info from everyone, hope to get a couple of pm's

08-24-2003, 06:16 PM	#1
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	springs or spindles??? Here is my question. I am lowering the rear of my 69 gmc LWB 4" with coils and may relocate the shocks and get an adjustable panhard bar. In the front I was wondering if I should go with drop spindles or drop springs. I heard that the springs from the 73-87 will fit also, so regardless if I change my front suspension to a newer style or not I should be fine. But will I still be able to get the front aligned after??? __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

08-25-2003, 11:12 AM	#2
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	I have 2.5 drop spindles and 1" shorter springs.No problem with alinement. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

08-25-2003, 02:25 PM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	On a spring drop only (front), you should stay with no more that 2" to keep geometry right on. There are guys running 3 " drop springs on the front, or cut coils(mine) & I beleive I have seen 4" springs listed......the spindle is the better way to go If you do a 2 1/2" spindle, you can add up to a 2" spring & have a really nice drop without alignment problems. Good luck, crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

08-25-2003, 06:05 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Spindle is a much better choice as you will use it with springs or bags at a later date! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-25-2003, 08:16 PM	#5
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	I would have to agree about the fact that spindles are much better. I guess it was more or a cost thing, since anything I decide to do will be a minimum X2 in price since I Live in Canada, a pair of springs is about 200-300$ where in the US it's about 99$ so figure drop spindles are about 250$ US wich translates into at least 500$. So by going with springs right now I can get the whole truck lowered along with an adjustable panhard bar and possibly relocate the shocks ( rear ) for the same price. So more bang for the buck. Besides at this point the truck will mostly be used on occasion when I am in town ( couple times a week during summer months). So as long as I can get the alignment correct then I'm happy. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags Last edited by GMC69; 08-25-2003 at 08:19 PM.

08-26-2003, 12:37 AM	#6
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	On this same topic Does anyone know the difference between the fron coils on the 67-72 trucks and the 73-87 trucks, and can I use one on the other. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.