TX 1971 Cheyenne parts for sale

[HSRACER]

I still have the following stuff left

Solid trailing arms. $100
Upper control arms. $45
Cowl $45
AC condenser (the one up front) I always get the condenser and evaporator confused! $40
Stock springs. $50 for all 4
Rear low shock mounts. $15
Pitman arm. $15
Emergency brake pedal assembly. $15
Fender emblems. $15
Cargo light and harness. $20
Ac/ heat control panel. $7
hood latch $10
A lot of small miscellaneous stuff ??

Call or text with any questions 713 410 6715

[BIG ORANGE]

interested in the side glass, must be scratch free, need a pair...

[29od1]

I'll take the Ac/ heat control panel for $7.
Can you post some pics and give me a quote for shipping to 67210?
Thanks,
David

[HSRACER]

Originally Posted by 29od1

I'll take the Ac/ heat control panel for $7.
Can you post some pics and give me a quote for shipping to 67210?
Thanks,
David

It is only the front panel and cover. 1 of the 3 levers is broken. I have pictures on the post titled "the last of the 71 part out. Please look at those to be sure you know what is for sale

[HSRACER]

Originally Posted by HSRACER

It is only the front panel and cover. 1 of the 3 levers is broken. I have pictures on the post titled "the last of the 71 part out. Please look at those to be sure you know what is for sale

http://67-72chevytrucks.com/vboard/a...1&d=1421706963

here is the pic of the items in the post I mentioned. If it doesn't show up then you will have to look at the actual post. The switch has been sold as well

[29od1]

Originally Posted by HSRACER

It is only the front panel and cover. 1 of the 3 levers is broken. I have pictures on the post titled "the last of the 71 part out. Please look at those to be sure you know what is for sale

Thanks I'll pass I need the entire unit. I thought it was complete when I asked.

[1968aj]

do you have automatic shifter linkage from transmission to steering column?

[HSRACER]

Originally Posted by 29od1

Thanks I'll pass I need the entire unit. I thought it was complete when I asked.

I figured you thought that. I wanted you to be aware of what it was. Thanks

[HSRACER]

Originally Posted by 29od1

I'll take the Ac/ heat control panel for $7.
Can you post some pics and give me a quote for shipping to 67210?
Thanks,
David

I do have a working unbroken one from another truck now. 35 plus shipping. l
LMK

[HSRACER]

Originally Posted by BIG ORANGE

interested in the side glass, must be scratch free, need a pair...

Here are some pics. Let me know

I am pretty nervous about shipping those. If they break, I didn't want to be responsible.

[BIG ORANGE]

Originally Posted by HSRACER

Here are some pics. Let me know

I am pretty nervous about shipping those. If they break, I didn't want to be responsible.

If you pack them good with material between and around the glass there isnt a issue in most cases, I've and shipped glass several times without any problems. Now the main question is, are they scratch free?? Im tinting them 5% so it will show every imperfection in the glass...
thanks Donnie

[HSRACER]

Originally Posted by BIG ORANGE

If you pack them good with material between and around the glass there isnt a issue in most cases, I've and shipped glass several times without any problems. Now the main question is, are they scratch free?? Im tinting them 5% so it will show every imperfection in the glass...
thanks Donnie

I will look closer tomorrow. They seem to be a slight tint already but there is no stick on anywhere. were they possibly tinted lightly from the factory?

I would much prefer local pick up on these. If you are willing to pay the shipping and packing supply cost I will consider doing it.

[HSRACER]

Originally Posted by HSRACER

I will look closer tomorrow. They seem to be a slight tint already but there is no stick on anywhere. were they possibly tinted lightly from the factory?

I would much prefer local pick up on these. If you are willing to pay the shipping and packing supply cost I will consider doing it.

my 55 year old eyes have to look really hard to see any scratches. On one if you get it in the right light at the right angle you can see a couple that are as fine as human hairs.

For a truck that is well over 40 years old and had been sitting outside for the last 10 years they are actually quite amazing upon close inspection.

[BIG ORANGE]

Originally Posted by HSRACER

I will look closer tomorrow. They seem to be a slight tint already but there is no stick on anywhere. were they possibly tinted lightly from the factory?

I would much prefer local pick up on these. If you are willing to pay the shipping and packing supply cost I will consider doing it.

Yes that is a factory tint, the key here is NO scratches that you can catch with the tip of yr fingernail. I'm tinting them 5% so scratches will show through the tint, keep that in mind.
thanks Donnie

[Crushkrew]

PM'd about control arms....

[HSRACER]

Originally Posted by Crushkrew

PM'd about control arms....

Here are some pics. Let me know.

[HSRACER]

Originally Posted by Crushkrew

PM'd about control arms....

I returned your pm with shipping price. LMK

[HSRACER]

Some more pictures of the things for sale.

[zicc1835]

second on the side glass if Orange doesn't take it ill be in Houston week of 23rd of feb i have friends in Katy

[zicc1835]

Originally Posted by zicc1835

second on the side glass if Orange doesn't take it ill be in Houston week of 23rd of feb i have friends in Katy

Has orange passed i see he has a wtb thread for side glass yesterday ....if so I'll take them have someone in Katy can pick up thanks lmk

[HSRACER]

Originally Posted by zicc1835

Has orange passed i see he has a wtb thread for side glass yesterday ....if so I'll take them have someone in Katy can pick up thanks lmk

Orange did not pass, I have decided not to ship these. I just don't want the hassle of boxing and packing them hoping ups doesn't drop them. Orange was also very particular on what he was looking for and I don't blame him for wanting perfect glass. These may have met his expectations but then again they may not have. I have refunded people a couple of times after they got the part and don't want there to be any misunderstanding regarding quality in the future. That is the reason for local pickup.

Let me know if you want them.

[zicc1835]

Originally Posted by HSRACER

Orange did not pass, I have decided not to ship these. I just don't want the hassle of boxing and packing them hoping ups doesn't drop them. Orange was also very particular on what he was looking for and I don't blame him for wanting perfect glass. These may have met his expectations but then again they may not have. I have refunded people a couple of times after they got the part and don't want there to be any misunderstanding regarding quality in the future. That is the reason for local pickup.

Let me know if you want them.

I'm going to make sure a Freind will pick them up for me sending u a p m

[zicc1835]

Originally Posted by zicc1835

I'm going to make sure a Freind will pick them up for me sending u a p m

Al
P P sent for glass my Freind will make arraignments with you to pic up thank you
Jess

[Krex]

Bumper?

[HSRACER]

Originally Posted by Krex

Bumper?

I have two other trucks I am considering parting out. They both have front and rear bumpers. The fronts are not so good but the backs are solid. What are you looking for?