![]() |
|
![]() |
#1 |
Registered User
![]() Join Date: Feb 2013
Location: Spring Hill, Florida
Posts: 465
|
First carb rebuild
well I have been thinking I should rebuild my carb for a while now. Its just a Rochester 2 jet so I thought what the heck lets give it a shot. The accelerator pump didn't want to work right anyway.
while I was at it I decided I would pull the valve covers and address the oil leaks and replace the pcv and breather. I pulled the heater box a while back and just looped the heater hose so I decided I would plug the lines and get rid of the loop... all was going well until I went to remove the nipple on the water pump and it twisted off with next to no force... off to the parts store I went new water pump PCV Valve, breather, assortment of grommets, new air cleaner... all in all was not a bad way to spend a Saturday... I rebuilt the carb over the week after work. I can say after a spin around the block that the carb seems to be running great and no more bog when I punch it! what's a thread without a few pics. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2015
Location: Long Island, New York
Posts: 245
|
Re: First carb rebuild
Looks great!
__________________
Red 1968 Chevy C10: 4bbl 350 v8 1984 Chevrolet Corvette Crossfire 350 1987 Chevrolet Camaro 305 4bbl 1993 Chevrolet Cavalier RS Convertible 3.1L V6 1982 Chrysler LeBaron Convertible Marc Cross Edition ![]() |
![]() |
![]() |
![]() |
#3 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: First carb rebuild
-
Well, you certainly are handy Mr Handy.... Seems like every time I try to rebuild a carb the truck never runs again... ![]() ![]() LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: First carb rebuild
Good work. It feels good to do a project & have it turn out nice. I'm putting A/C in my 56. I hope it turns out well.
It seems you may need that heater, even in Florida. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2010
Location: MD
Posts: 1,937
|
Re: First carb rebuild
Cool deal.
![]()
__________________
1969 c-10 Step Side Long Bed. I-6 250cid = ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2014
Location: Aloha, Or.
Posts: 46
|
Re: First carb rebuild
Fear the Quadrajet!
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Feb 2013
Location: Spring Hill, Florida
Posts: 465
|
Re: First carb rebuild
Went for a drive this after noon to visit a friend, 60 mile round trip. The truck ran perfect. My Wife says it sounds better as well so I can't argue.
It makes me want to pick up a Qjet just to see what the fuss is about... My buddy has a Q on his 70 1 ton so I may get a chance to give it a go at some point. I'll be running a Holley on my 350 when I drop it in. I have a line on a 65 mustang and as of right now this 283 may go in it if all works out. I think it would be awesome to have a bright orange motor under the hood of a 65 coupe... if for nothing else but to piss everyone at the car show off. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|