Need a new 80psi oil pressure gauge.

[rs74]

Where can I get one of these with the 80 psi? Mine is sticking in places. From the ones that I have found so far they either have the L(low) to H(high) marks or they only go up to 60 psi which I assume is for a gas engine. I need one for a diesel. Might just have to go hit the junk yard.

[ray_mcavoy]

Yes, the 80 psi oil pressure gauges are most commonly found in trucks with diesel engines. I think some medium duty trucks with gas engines might have used the 80 psi gauges as well.

Also, if it's a 1978+ electric gauge, the sending units tend to be more failure prone than the gauges themselves. So that might be worth checking if you haven't done so already.

[rs74]

Originally Posted by ray_mcavoy

Yes, the 80 psi oil pressure gauges are most commonly found in trucks with diesel engines. I think some medium duty trucks with gas engines might have used the 80 psi gauges as well.

Also, if it's a 1978+ electric gauge, the sending units tend to be more failure prone than the gauges themselves. So that might be worth checking if you haven't done so already.

I was kind of thinking it might be the sending unit too. It was unplugged until today when I plugged it back in and noticed how it was acting. I have a new sending unit already on an order I am placing. I might just see if that does the trick but may also buy a gauge anyway. Never hurts to have some spares.

[burkeftm]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any [URL="http://67-72chevytrucks