![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2011
Location: Louisville, KY
Posts: 756
|
After searching, I still have a ball joint question
Any preferred brand? I found Moog upper and lowers on Summit:
http://www.summitracing.com/parts/mo...del/c10-pickup http://www.summitracing.com/parts/mo...del/c10-pickup These are for factory A-arms on a '69 C10 and I will be installing ECE 2.5" drop spindles. I just want to make sure I'm ordering the right parts first. Thanks. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2014
Location: Bowling Green, Kentucky
Posts: 25
|
Re: After searching, I still have a ball joint question
I used the same MOOG ball joints on my winter project with 2.5" drop spindles. I also purchased MOOG springs, control arm shafts, and tie rods.
The lower ball joints pressed in nicely on my stock 72 arms. I bought them on recommendation from other build threads here. I can't vouch for their durability because my truck is still sitting as a bare frame, but everything fit nicely and was stronger than stock
__________________
Dalton -1972 C10 LS swapped SWB conversion- http://67-72chevytrucks.com/vboard/s...d.php?t=657591 ![]() -2004 Chevy 1500 swb daily driver |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2011
Location: Louisville, KY
Posts: 756
|
Re: After searching, I still have a ball joint question
Thanks.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,270
|
Re: After searching, I still have a ball joint question
Moog will do you better than fine. I trust in them. Jim
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|